Denon AVR 1709 - AV Receiver Owner's Manual

Also see for AVR 1709 - AV Receiver: Capabilites and Compatibilities Specifications Specification Getting started

Denon AVR 1709 - AV Receiver Owner's Manual Manual pdf 49 page image

Getting Started Connections Setup Remote Control Multi-Zone Information TroubleshootingENGLISHQuick Select FunctionWith this function, the currently playing input source, volumelevel, surround mode, MultEQ, Dynamic Volume, DV setting andfront speaker can be stored in the memory.1 Set the input source, input mode, surround mode,MultEQ and volume to the conditions you want tostore.2 Press and hold QUICK SELECT until “Memory”appears on the display.The current settings will be memorized.To call out the settings, press QUICK SELECT at which the desiredsettings were stored.Input Source VolumeQuick Select 1 DVD/HDP –40 dBQuick Select 2 TV/CBL –40 dBQuick Select 3 VCR –40 dB[Quick Select Defaults]Personal Memory Plus FunctionThis function sets the settings (input mode, surround mode,MultEQ, Dynamic EQ, Dynamic Volume, audio delay etc.) lastselected for the individual input sources.When you switch to an input source, the settings are automaticallyset to the ones that were set the last time that input source wasused.The surround parameters, tone control, MultEQ settings and thevolumes of the different speakers are stored for the individual surroundmodes.Last Function MemoryThis stores the settings as they were directly before the standbymode was set.When the power is turned back on, the settings are restored to asthey were directly before the standby mode was set.Backup MemoryThe various settings are backed up for about 1 week, even if thepower is turned off or the power cord is disconnected.Resetting the MicroprocessorPerform this procedure if the display is abnormal or if operationscannot be performed.When the microprocessor is reset, all the settings are reset totheir default values.1 Turn off the power using .2 Press while simultaneously pressing and .3 Once the display starts flashing at intervals of about 1second, release the two buttons.If in step 3 the display does not flash at intervals of about 1 second,start over from step 1.Playback