Denon AVR-1905 Operating Instructions Manual

Also see for AVR-1905: Operating instructions Brochure & specs Service manual

Contents

24ENGLISH• After adjusting using the test tones, adjust the channel levels either according to the playback sources or tosuit your tastes, as (described) below.FL C FR SR SBR SBLSLSW1 Select the speaker whoselevel you want to adjust.2The channel switches as shown below eachtime the button is pressed.Adjust the level of theselected speaker.(Remote control unit)NOTE:• Please make sure the “AUDIO” position ofthe slide switch on the remote control unit.212Default setting of channel level is 0 dB.The level of the selected speaker can beadjusted within the range of +12 to –12 dBusing the cursor buttons.SW channel level can be turned off bydecreasing one step from –12 dB.OFF ´ –12 dB ´ 12 dB2 STANDARD(Main unit) (Remote control unit)• The Dolby Pro Logic II indicator lights.LOGICIIDisplay Light3 Play a program source with the mark.• For operating instructions, refer to the manuals of the respective components.Dolby Pro Logic IIx (Pro Logic II) mode1 Select the function to which the componentyou want to play is connected.5, 74, 61 245, 7195, 7266The Dolby Surround ProLogic IIx Cinema or Musicmode can be chosendirectly by pressing theCINEMA or MUSIC buttonon the remote control unitduring playback in theDolby Surround Pro LogicIIx mode.FUNCTION(Main unit) (Remote control unit)(Remote control unit)When the surround back speaker settingis set to “1sp” for “Speaker Configuration”,this is set to “SB”.To play in the PL IIx mode, set “S.BackSp” at the Speaker Configuration setting to “1Sp” or ”2Sp”.Example: DVDSelect the Dolby Surround Pro Logic IIx mode.4 Select the surround parameter mode.SURROUNDPARAMETERTo perform this operation from the remote controlunit, check that the mode selector switch is set to“AUDIO”.(Main unit)(Remote control unit)Display