Denon AVR-1906 Operating Instructions Manual

Also see for AVR-1906: Service manual Brochure & specs Operating instructions

Denon AVR-1906 Operating Instructions Manual Manual pdf 17 page image

ENGLISH14ENGLISHConnecting Other Sources Connecting Other SourcesConnecting a VCRVideo deckS VIDEOOUTS VIDEOINRLAUDIO OUTVIDEOOUTVIDEOINRLAUDIO INOPTICALINOPTICALOUTRLRLFFGGRLRLACOMPONENT VIDEO OUTYPBPRHDDA• For best picture quality choose the component video connection to your VCR. S-Video andcomposite video outputs are also provided.• If you wish to perform analog dubbing from a digital source, such as a DVD recorder to an analogrecorder such as a cassette deck, you will need to connect the analog inputs and outputs asshown below, in addition to the digital audio connections.• The digital inputs and outputs connection is the same as that for a CD (MD) recorder.NOTE:• When recording to a VCR, it is necessary that the type of cable used with the playback sourceequipment be the same type that is connected to the AVR-1906 VCR OUTPUT terminal.Example: VCR IN → S-Video cable : VCR OUT → S-Video cableVCR IN → Video cable : VCR OUT → Video cableConnecting a tape deckRLAUDIO OUTRLAUDIO INTape deckRLRLARLRLA• If humming noise is generated, move the tape deck further away from the source of such noise.Connecting a CD recorder or MD recorderRLAUDIO INRLAUDIO OUTCD recorder /MD recorderOPTICALOUTOPTICALINRLRLARLRLADDIf you wish to perform analog dubbing from a digital source, such as a CD or MD recorder to ananalog recorder such as a tape deck, you will need to connect the analog inputs and outputs asshown below, in addition to the digital audio connections.NOTE:• Do not connect the output of the component connected to the OPTICAL 2 OUT terminal onthe AVR-1906’s rear panel to any terminal other than the OPTICAL 2 IN terminal ( page 40).