1Either turnor press[TUNER]toselect “TUNER”.2Set[SOURCE CONTROL 1]to “AUDIO” and[SOURCECONTROL 2]to “TUNER”.(vpage 56 “Remote Control Unit Operations”)3Pressto select “RT”.bWhile receiving an RDS broadcast station, the text data broadcastfrom the station is displayed.bTo turn the display off, pressop.bIf no text data is being broadcast, “NO TEXT DATA” is displayed.RT (Radio Text)“RT” appears on the display when radio text data isreceived.nTo end RDS search / PTY search / TP search / RT•Do not operate anything for 15 seconds.•When setting RT, press.1Either turnor press[TUNER]toselect “TUNER”.2Set[SOURCE CONTROL 1]to “AUDIO” and[SOURCECONTROL 2]to “TUNER”.(vpage 56 “Remote Control Unit Operations”)3Pressto select “TP”.4Pressor[CHANNEL+ –].TP search begins automatically.bIf no TP station is found with the above operation, all the receptionbands are searched.bThe station name is displayed on the display after searchingstops.5To continue searching, repeat steps 2 to 3.bIf no other TP station is found when all the frequencies have beensearched, “NO PROGRAMME” is displayed.TP SearchUse this function to find RDS stations broadcasting trafficprograms (TP stations).SpecificationsGetting StartedConnectionsSetupPlaybackRemote ControlMulti-zoneInformationTroubleshootingENGLISHSpecifications1Either turnor press[TUNER]toselect “TUNER”.2Set[SOURCE CONTROL 1]to “AUDIO” and[SOURCECONTROL 2]to “TUNER”.(vpage 56 “Remote Control Unit Operations”)3Pressto select “PTY”.4Watching the display, pressuito call out the desiredprogram type.5Pressor[CHANNEL+ –].PTY search begins automatically.bIf there is no station broadcasting the designated program typewith the above operation, all the reception bands are searched.bThe station name is displayed on the display after searchingstops.6To continue searching, repeat steps 2 to 4.bIf no station broadcasting the designated program type is foundwhen all the frequencies have been searched, “NO PROGRAMME”is displayed.PTY SearchUse this function to find RDS stations broadcasting adesignated program type (PTY).For a description of each program type, refer to “ProgramType (PTY)”.