Denon AVR-1911 Owner's Manual

Also see for AVR-1911: Specifications Service manual Owner's manual Manual Del Usuario

Denon AVR-1911 Owner's Manual Manual pdf 24 page image

20ENGLISHPlayback (Basic operation)n Playing a Blu-ray Disc player/DVD player(vpage 21)n Playing a CD player (vpage 21)n Playing an iPod® (vpage 21)n Tuning in radio stations (vpage 24)n Playing a USB memory device (vpage 27)Selecting a listening mode (Surround mode)(vpage 28)n Selecting the input source (vpage 20)n Adjusting the master volume (vpage 20)n Turning off the sound temporarily (vpage 20)Playback (Advanced operation) (vpage 36)Important informationBefore starting playback, make the connections between the differentcomponents and the settings on the receiver.NOTEAlso refer to the operating instructions of the connected componentswhen playing them.Selecting the input sourcePress the input source select button(NET/USB, iPod, DVD, BD, TUNER,DOCK, SAT/CBL, GAME, V.AUX, CD,TV) to be played back.The desired input source can be selecteddirectly.• When iPod PLAY is pressed, the inputsource of this unit is switched to “DOCK”or “USB/iPod” and the connected iPod isautomatically played (vpage 23 “iPod playfunction”).You can also use the following operation to select an inputsource.n Using the “Source Select” menuq Press SOURCE SELECT.Display the “Source Select” menu.BDCDDVDTVGAMESAT/CBLV.AUXDOCKTUNERSource Select[ENT]:Select[ ]:SourceThe currently selected input sourceis highlighted.w Use uio p to select the input source,then press ENTER.The input source is set and the sourceselection menu is turned off.• When using with an iPod connected directly to the USB port of thisunit, select “USB/iPod” for the input source.• Input sources that are not going to be used can be set ahead of time.Make this setting at “Source Delete” (vpage 59).• To turn off the source selection menu without selecting an inputsource, press SOURCE SELECT again.n Using the knob on the main unitTurn SOURCE SELECT.• Turning SOURCE SELECT switchesthe input source, as shown below.BD DVD TV SAT/CBL GAMEV.AUXUSB/iPod DOCKTUNERCDAdjusting the master volumeUse VOL df to adjust the volume.n When the “Volume Display” setting(vpage 59) is “Relative”GAdjustable rangeH– – – –80.5dB – 18.0dBn When the “Volume Display” setting (vpage 59) is“Absolute”GAdjustable rangeH 0.0 – 99.0• The variable range differs according to the input signal and channellevel setting.You can also operate via the main unit.In this case, perform the followingoperations.Turn MASTER VOLUME to adjust thevolume.Turning off the sound temporarilyPress MUTE.• The sound is reduced to the level set at “Mute Level” (vpage 59).• To cancel, press MUTE again. Muting can also be canceled byadjusting the master volume.