Denon AVR-1911 Owner's Manual

Also see for AVR-1911: Specifications Owner's manual Service manual Manual Del Usuario

Denon AVR-1911 Owner's Manual Manual pdf 40 page image

37ENGLISH Basic versionSimple version InformationAdvanced versionConvenient functionsSleep timer functionThe power automatically goes into standby once the set time haselapsed.This is convenient for playing sources while going to sleep. SLEEP & & The “SLEEP” indicator on the display lights.• The time switches as shown below eachtime SLEEP is pressed.OFF 10 min 20 30 40 506080 7090100110120To cancel the sleep timerPress SLEEP to set “OFF”.The “SLEEP” indicator on the display turns off.• The sleep timer setting is canceled if this unit’s power is set tostandby or turned off.• When power to the main zone isturned off with the sleep timer,power in ZONE2 is also turned off.• If SLEEP on the main unit is pressed,the same function as with theremote control unit can be obtained.Adjusting the volume of the speakersYou can adjust the channel level either according to the playbacksources or to your taste, as described below.n Adjusting the volume of the different speakers1 ZONE SELECT !"#The “MAIN” indicator lights.2 AMP $ 3 CH LEVELChannel LevelC 0.0dB SBR 0.0dBFL 0.0dB SR 0.0dB[ ]:CH Sel.FR 0.0dB SBL 0.0dBSW 0.0dB SL 0.0dBFaderFRONT : REAR4 ' ui % The speaker that can be set switcheseach time one of the buttons is pressed.5 ' op ) • In the case of a subwoofer, pressing o when it is at “–12 dB” willchange the setting to “OFF”.When a headphone jack is inserted, the headphone channel level canbe adjusted.n Adjusting the volume of groups of speakers(Fader function)This function lets you adjust (fade) the sound all at once from thefront (front speaker / front height speaker / center speaker) or rear(surround speaker / surround back speaker).1 ZONE SELECT !"#The “MAIN” indicator lights.2 AMP $ 3 CH LEVELChannel LevelC 0.0dB SBR 0.0dB[ ]:CH Sel.FR 0.0dB SBL 0.0dBSW 0.0dB SL 0.0dBFRONT : REARFL 0.0dB SR 0.0dBFader4 ' i ? # op5 ' op ) % (o : front, p: rear)• The fader function does not affect the subwoofer.• The fader can be adjusted until the volume of the speaker is adjustedto the lowest value of -12 dB.