37Adjusting the master volumeUse VOLUME df to adjust thevolume.• The volume display method variesdepending on the “Scale” setting(vpage 116).n When the “Scale” setting(vpage 116) is “0 – 98”GAdjustable rangeH 0.0 0.5 – 98.0n When the “Scale” setting (vpage 116) is “–79.5dB –18.0dB”GAdjustable rangeH – – –.– –79.5dB – 18.0dB• The variable range differs according to the input signal and channellevel setting.You can also adjust the master volume by turning MASTER VOLUMEon the main unit.Turning off the sound temporarilyPress MUTE :.• “MUTE” indicator on the display flashes.• : appears on a TV screen.• The sound is reduced to the level set at “Mute Level” (vpage 116).• To cancel, press MUTE : again. Muting can also be canceled byadjusting the master volume.Important information Playing a Blu-ray Disc player/DVDplayerThe following describes the procedure for playing Blu-ray Disc player/DVD player.1 Prepare for playback.q Turn on the power of the TV,subwoofer and player.w Change the TV input to the input ofthis unit.e Load the disc in the player.2 Press POWER X to turn on powerto the unit.3 Press Blu-ray or DVD to switch an input source for aplayer used for playback.4 Play the Blu-ray Disc player or DVD player.• Make the necessary settings on the player (language setting,subtitles setting, etc.) beforehand.Playing a Blu-ray Disc playercompatible with Denon Link HD• Denon Link HD uses the clock of the AV amplifier connected byDenon Link to achieve HDMI signal transfer with low jitter whenplaying BD.• To play Denon Link HD signals, make HDMI and Denon Linkconnections with a compatible Blu-ray disc player (“Connecting aplayer compatible with the Denon Link HD function” (vpage 12).1 Prepare for playback.q Turn on the power of the TV,subwoofer and player.w Change the TV input to the input ofthis unit.e Load the disc in the player.2 Press POWER X to turn on powerto the unit.3 Perform the settings of the “Input Assign” menu(vpage 125).q Assign HDMI connectors for the input source.(example: Blu-ray)w Set “DIGITAL” to “D.LINK”.4 Set “HDMI Control” (vpage 121) to “On”.5 Press the input source select button (example: Blu-ray) to switch an input source assigned in step 3 - q.6 Set the audio input mode to “Auto” using the “InputMode” menu (vpage 127).• The default setting of “Input Mode” is “Auto”.7 Play the component connected to this unit.• Make the necessary settings on the player (language setting,subtitles setting, etc.) beforehand.