DiRECTiON OFBROADCASTINGSTATIONi FM ANTENNA75 .r)/ohmsCOAXIALCABLEffEMINDOORANTENNA(Supplied)AM LOOPANTENNA(Supplied)_REOUl°@®@@4 AM OUTDOORANTENNA7///AM loop antenna assemblyO ®_Re.move the vinyl tieand take out the(_ connection line.a. With the antennaon top any stablesurfface.Connect to the AMantenna terminals.Bend in the reversedhection.Mountb. With the antennaattached to a wall. _Installation holeMount on wall, etc.Note to CATV system installer:GROUND• An F-type FM antenna cable plug can be connected directly.Connection of AM antennas1 Pushthe lever. 2. Insert the conductoL 3. Return the ]ever._> =>This reminder is provided to call the CATV system instaNer'sattention to Article 820-40 of the NEC which providesguidelines for proper grounding and, in particulah specifiesthat the cable ground shall be connected to the groundingsystem of the building, as close to the point of cable entryas practical.Notes:• Do not connect two FM antennas simultaneously.• Even if an external AM antenna is used, do not disconnectthe AM loop antenna.• Make sure AM loop antenna lead terminals do not touchmetal parts of the panel.• These jacks are fer inputting multi-channel audie signals frem an eutboard deceder, or a component with a different type ef multFchanneldecoder, such as a DVD Audie [)layer, a multi-channel SACD [)layer, er other future multi-channel sound fermat deceder.• When making connections, also refer to the eperating instructiens of the ether components.Decoder with 8- or 6-channelanalog output._ Fer instructiens on playback using the external input (EXT. IN)jacks. (See page 63)11