GUI Menu Map Playback Information TroubleshootingENGLISHInputsource DVD HDP TV/CBL SAT VCR DVR V.AUXDefaultsettingComponent1Component2Component3 None None None NoneComponentSelect component video input to assign to this source.[Input source][Selectable items]NOTEThis cannot be set for input sources for which “iPod dock” or “SIRIUS“is assigned.1 2 3 NoneDVD HDP TV/CBL SAT VCRDVR V.AUXAssign NoneSIRIUSAssign SIRIUS to this source.CD DVD HDP TV/CBL SAT VCRDVR V.AUX[Input source][Selectable items]NOTE• “SIRIUS” and “iPod Dock” cannot both be assigned.• When “SIRIUS” is assigned to the input source, “232C Port”(vpage 5) cannot be set. In addition, External Controller and 2-wayRemote cannot be used.ParameterAudioAdjust various audio parameters.F Menu tree FParameterAudioa Surround Parameterss Audyssey Settingsa Surround ParametersAdjust surround sound parameters.The adjustable parameters differ for the different surroundmodes.NON MTRX MTRX ON PLIIx CINEMA z1 PLIIx MUSIC z2ES MTRX z3 ES DSCRT z4 DSCRT ON OFFz1: This can be selected when “Surround Back” is set to “2spkrs”at the GUI menu “Manual Setup” – “Speaker Setup” – “SpeakerConfiguration” setting.z2: This can be selected when “Surround Back” is set to “2spkrs”or “1spkr” at the GUI menu “Manual Setup” – “Speaker Setup”–“Speaker Configuration” setting.z3: This can be selected when playing DTS sources.z4: This can be selected when playing DTS sources including adiscrete 6.1-channel signal identification signal.SB CH Out (for Multi-channel sources)Select playback mode for surround back channels.[Selectable items]When using the surround back speaker, you can change the “SBCH Out” setting by pressing STANDARD.s Audyssey SettingsSelect Room EQ, Dynamic EQ and Dynamic Volume.Room EQ[Selectable items]Audyssey : Optimize frequency response of all speakers.Audyssey Byp. L/R : Optimize frequency response of speakersexcept front L and R speakers.Audyssey Flat : Optimize frequency response of all speakersto flat response.Manual : Apply frequency response set with “ManualEQ”.OFF : Turn equalizer off.Operating from the main unit or main remotecontrol unitPress ROOM EQ.Audyssey Audyssey Byp. L/RAudyssey FlatManualOFF• When “Audyssey”, “Audyssey Byp. L/R” or “Audyssey Flat” isselected, “ ” lights.• After running Auto Setup, if the Speaker Configuration, Distance,Channel Level, and Crossover Frequency have changed withoutincreasing the number of speakers measured, only “ ”lights.• “Audyssey”, “Audyssey Byp. L/R” and “Audyssey Flat” can beselected after the auto setup procedure has been performed.• After performing “Auto Setup”, the “Room EQ” setting automaticallybecomes “Audyssey”.• If the settings of speakers for which “None” has been determinedat “Auto Setup” are changed, “Audyssey”, “Audyssey Byp. L/R”and “Audyssey Flat” cannot be selected. Either perform Auto Setupagain, or return to the setting after running Auto Setup with “AutoSetup” – “Parameter Check” – “Restore”.• When using headphones or EXT. IN mode, “Room EQ” cannotused.Setupz: When a DENON DVD player and the DENON LINK have beenconnected, be sure to make a setting to “DENON LINK”.NOTE• This cannot be set for input sources for which “iPod dock” isassigned.• When an input source to which “DENON LINK” has been assignedis selected in the MAIN ZONE, the PCM signal and network audiosignal (Internet radio, music server or USB) input from the digitalinput connector cannot be output to the analog REC OUT connectoror multizone.Inputsource CD DVD HDP TV/CBL SAT VCR DVR V.AUXDefaultsettingCoaxial3Coaxial1 None Coaxial2Optical1Optical3Optical2Optical4When “HDMI Control” is set to “ON”, the digital input connectorassigned to ”TV/CBL” changes to “Optical3”.