Denon AVR-3808CI Owner's Manual

Also see for AVR-3808CI: User manual Product Compatibility Chart Capabilites and Compatibilities Specifications Specification

Denon AVR-3808CI Owner's Manual Manual pdf 59 page image

Getting Started Connections Setup Playback Remote Control Multi-Zone Information TroubleshootingRecording on an External Device(REC OUT mode)You can listen to one program source while recording adifferent program source.1 Press .“ZONE2 SOURCE” is shown on the display.ZONE2 SOURCE ZONE2 TUNER ZONE2 XM····RECOUT XM RECOUT NET/USB RECOUT SOURCE····2 Turn until “RECOUT SOURCE”is displayed.The “ ” indicator lights.3 Turn to choose the input sourceto be recorded.4 Play the program source.For operating instructions, refer to the respective equipment’soperating instructions.To record FM or AM broadcasts, select the broadcast (vpage47).5 Start recording.For operating instructions, refer to the respective equipment’soperating instructions.• To cancel, press , then turn until “ZONE2 SOURCE” is displayed.• Make a test recording before starting the actual recording.• Signals are only output to the analog REC OUT connectors whenthe digital signals input to the digital input connectors (OPTICAL/COAXIAL) are PCM (2-channel) signals.• Digital audio signals input to the DENON LINK or HDMI connectorsare not output to the REC OUT connectors, so connect using theOPTICAL or COAXIAL connectors.• Sources selected with the REC OUT mode are output from ZONE2as well.• In the REC OUT mode, the remote control unit’s ZONE2 modebuttons cannot be operated.• The “XM” digital audio output signals are not output from theOPTICAL2 or OPTICAL3 output connectors. Also, network audiosignals (Internet radio, music server, USB) are not output if they arecopyright-protected.NOTE• Recordings you make are for your personal enjoyment and shouldnot be used for other purposes without permission of the copyrightholder.• When “DENON LINK” is assigned at the GUI menu “Assign” setting,the PCM signals, network audio signals (Internet radio, music serverand USB), XM signals input from the digital input connectors cannotbe output from the analog REC OUT connectors.• Input sources for which “Delete” is selected at “Source Delete”cannot be selected.Getting Started Connections Setup Playback Remote Control Multi-Zone Information TroubleshootingGetting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting1 Press CH SELECT.2 Press ui or CH SELECT to select “Fader”.3 Use o p to adjust the volume of the speakers.(o: front, p: rear)• The fader function does not affect the subwoofer.• The fader can be adjusted until the volume of the speaker adjustedto the lowest value is –12 dB.Fader FunctionThis function lets you adjust (fade) the sound from all thefront or rear speakers at once.Convenient Functions1 Press CH SELECT.2 Use ui or CH SELECT to select the speaker.The speaker that can be set switches each time one of thebuttons is pressed.3 Use o p to adjust the volume.b “OFF” can be set by pressing o when the subwoofer’s volume isset to –12 dB.Channel LevelYou can adjust the channel level either according to theplayback sources or to suit your taste, as describedbelow.