Denon AVR-4208 Service Manual

Also see for AVC-A11SR: Control protocol Service manual Operating instructions Mode d'emploi

Contents

2AVR-4802/AVC-A11SRSAFETY PRECAUTIONSThe following check should be performed for the continued protection of the customer and service technician.LEAKAGE CURRENT CHECKBefore returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassisresistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of thepower cord is less than 460 kohms, the unit is defective.SPECIFICATIONSAudio SectionPower amplifier:Rated output: Stereo (2 ch driven)(All properties shown are only for the 125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)power amplifer stage.) 150 W + 150 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)Dynamic power: 170 W × 2 ch (8 Ω/ohms)270 W × 2 ch (4 Ω/ohms)350 W × 2 ch (2 Ω/ohms)Output terminals: Front/Center: 6 ~ 16 Ω/ohmsSurround: A or B 6 ~ 16 Ω/ohmsA + B 8 ~ 16 Ω/ohmsAnalog:Input sensitivity/input impedance: 200 mV/47 kΩ/kohmsFrequency response: 10 Hz ~ 100 kHz: +0, −3 dB (DIRECT mode)S/N: 105 dB (DIRECT mode)Distortion: 0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)Rated output/maximum output: 1.2 V/8 VDigital:D/A output: Rated output  2 V (at 0 dB playback)Total harmonic distortion  0.005 % (1 kHz, at 0 dB)S/N ratio  110 dBDynamic range  108 dBDigital input: Format  Digital audio interfacePhono equalizer (PHONO input  REC OUT):Input sensitivity: 2.5 mVRIAA deviation: ±1 dB (20 Hz to 20 kHz)Signal-to-noise ratio: 74 dB (A weighting, with 5 mV input)Rated output/Maximum output: 150 mV/8VDistortion factor: 0.03 % (1 kHz, 3 V)Video SectionStandard video jacksInput/output level and impedance: 1 Vp-p, 75 Ω/ohmsFrequency response: 5 Hz ~ 10 MHz  +0, −3 dBS-video jacksInput/output level and impedance: Y (brightness) signal  1 Vp-p, 75 Ω/ohmsC (color) signal  0.286 Vp-p, 75 Ω/ohmsFrequency response: 5 Hz ~ 10 MHz  +0, −3 dBColor component video terminal:Input/output level and impedance: Y (brightness) signal  1 Vp-p, 75 Ω/ohmsP B /CB (blue) signal  0.7 Vp-p, 75 Ω/ohmsP R/C R (red) signal  0.7 Vp-p, 75 Ω/ohmsFrequency response: DC ~ 50 MHz  +0, −3 dBTuner Section [FM] (note: μV at 75 Ω/ohms, 0 dBf = 1 × 10 -15 W) [AM]Receiving range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHzUsable sensitivity: 1.0 μV (11.2 dBf) 18 μV50 dB Quieting sensitivity: MONO 1.6 μV (15.3 dBf)STEREO 23 μV (38.5 dBf)Signal to Noise Ratio (IHF-A): MONO 77 dB 50 dBSTEREO 72 dBTotal Harmonic Distortion (at 1 kHz): MONO 0.15 %STEREO 0.3 %GeneralPower supply: AC 120 V, 60 Hz (U.S.A., Canada & Taiwan R.O.C. model)AC 230 V, 50 Hz (Europe & Asia model)AC 220 V, 50 Hz (China model)Power consumption: 10.5 A (U.S.A., & Canada model)Maximum external dimensions: 434 (W) × 179 (H) × 485 (D) mm (17-3/32″ × 7-3/64″ × 19-3/32″)Mass: 20.5 kg (45 lbs 3.1 oz)Remote Control Unit (RC-8000): AVR Model onlyBatteries: LR6/AA Type (four batteries)External dimensions: 96 (W) × 38 (H) × 168.5 (D) mm (3-25/32″ × 1-1/2″ × 6-41/64″)Mass: 242 g (Approx. 8.5 oz) (not including batteries)Remote Control Unit (RC-899): AVC Model onlyBatteries: R6P/AA Type (three batteries)External dimensions: 61 (W) × 230 (H) × 34 (D) mm (2-13/32″ × 9-1/16″ × 1-11/32″)Mass: 150 g (Approx. 5.3 oz) (not including batteries)* For purposes of improvement, specifications and design are subject to change without notice.www . xiaoyu163. comQQ 376315150 992894298TEL 13942296513 992894298051513673QQTEL 13942296513 QQ 376315150 892498299TEL 13942296513 QQ 376315150 892498299http://www.xiaoyu163.comhttp://www.xiaoyu163.com