Denon AVR-486 Operating Instructions Manual

Also see for DHT-486DV: Operating instructions Specifications

Denon AVR-486 Operating Instructions Manual Manual pdf 9 page image

ENGLISH6ENGLISHEasy Operation Easy OperationConnecting a DVD player and monitor TV• To connect the digital audio output from the DVD player, you can choose from either the coaxialor optical connections. If you choose to use the coaxial connection, it needs to be assigned. Formore information about Digital Input Assignment ( page 16).• Connect a non-DVD video disc player (such as a laser disc, VCD/SVCD, or future high definitiondisc player) to the DVD/VDP terminals in the same way.• Precaution when using S-terminalsThis unit’s S-terminals (input and output) and video pin terminals (input and output) haveindependent circuit structures, so that video signals input from the S-terminals are only outputfrom the S-terminal outputs and video signals input from the pin terminals are only output fromthe pin terminal outputs.When connecting this unit with equipment that is equipped with S-terminals, keep the abovepoint in mind and make connections according to the equipment’s instruction manuals.Audio signal flow is shown with white arrows; video signal flow is shown with gray arrows.DVD playerS VIDEOOUTRLAUDIO OUTVIDEOOUTCOMPONENT VIDEO OUTYPBPROPTICALOUTFHGDRLRLAS VIDEOINVIDEOINMonitor TVCOMPONENT VIDEO INYP BPRFHG• For best picture quality (especially with progressive DVD and other high definition sources),choose the component video connection to your monitor TV. S-Video and composite videooutputs are also provided if your TV does not have component video inputs.• The signals input to the color difference (component) video terminals are not output from theVIDEO output terminal (yellow) or the S-Video output terminal.NOTE:• The component video input and/or output terminals may be labeled differently on some TVs,monitors or video components (Y, PB , PR ; Y, C B, CR ; Y, B-Y, R-Y). Check the owner’s manualsfor the other components for further information.Connecting the power supply cordAC 120 V, 60 HzAC outlet (Wall)NOTE:• Only use the AC OUTLETS for connecting audio equipment. Never use it for hair driers, TVsor other electrical appliances.AC OUTLETS• SWITCHED (total capacity – 120 W (1 A.))The power to this outlet is turned on and offin conjunction with the POWER switch on themain unit, and when the power is switchedbetween on and standby from the remotecontrol unit.No power is supplied from this outlet whenthis unit’s power is at standby. Never connectequipment whose total power consumptionexceeds 120 W (1 A.).