|
Basic Operation Basic OperationENGLISH30ENGLISHPress ENTER or SURROUND PARAMETER.Press GG to select “OFF”.Press DD HH to select “Bass” or “Treble”, then press FFGG to set the level.Can be adjusted within the range of –10 dB to +10 dB.345Press or set “Tone Defeat” to “ON” atstep 3 in “Adjusting the tone”.Adjusting the speaker volumePress [CH SELECT].Press [CH SELECT] to select the speaker.The settable speaker switches each time this button is pressed.Press [FF GG] to adjust the volume.The SW channel level can be turned off by decreasing it one stepfrom –12.0 dB.OFF ´ –12.0 dB ´ +12.0 dB123Setting the tone controlAdjust the bass and treble to suit your tastes.Press SURROUND PARAMETER.Press DD HH to select “TONE DEF. ON”.In the direct mode, “TONE” cannot be selected.12R O O M S I Z E M E D1T O N E D E F . O N2¢ Adjusting the tone¢ When you do not want to adjust the toneT O N E D E F . O F F3B A S S 0 d B4T R E B L E 0 d BListening to the radioCheck that the remote control unit is set to “AUDIO”.Hold •> and press .• The unit automatically begins searching for FM broadcaststations.When the first FM broadcast station is found, that station isstored in the preset memory at channel A1.Subsequent stations are automatically stored in order at presetchannels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 toF8 and G1 to G8 for a maximum of 56 stations.Channel A1 is tuned in after the auto preset memory operation iscompleted.Auto preset memoryThis unit is equipped with a function for automatically searching forFM broadcast stations and storing them in the preset memory.• If an FM station cannot be preset automatically due to poorreception, use the “Manual tuning” operation to tune in the station,then preset it using the manual “Preset memory” operation.• To interrupt this function, press .¢ Default settingsAuto tuner presetsA1 ~ A8 87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /90.1 MHzB1 ~ B8 520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,90.1 / 90.1 MHzC1 ~ C8 90.1 MHzD1 ~ D8 90.1 MHzE1 ~ E8 90.1 MHzF1 ~ F8 90.1 MHzG1 ~ G8 90.1 MHzSwitch off the unit using .12
|
