12Network Audio Function Network Audio FunctionENGLISHENGLISH• There are many Internet radio stations on the Internet. Theprograms they broadcast and their bit rates vary widely.Generally, the higher the bit rate, the higher the sound quality, butstreamed music or sound may be broken if the communication linesor servers are busy. Inversely, programs with low bit rates havelower sound quality but tend to be more stable.• “Server Full” or “Connection Down” is displayed if the station iscongested or if it is not broadcasting.• If you do not want the on screen display to be displayed whileplaying Network Audio (internet radio, music server), set“Function/Mode Status” at “Setting the On Screen Display” to“OFF” (Refer to page 77, 78 for operating instructions).2 34 5Listening to Internet radioThe required system connections and settings must be made in orderto listen to Internet radio.“Update?” appears on the display when connecting to an Internetradio station for the first time.Use to select “AUX” or press [AUX](AMP mode).1Press DD HH to select “Internet Radio”, then pressENTER or GG.• The initial screen when not connected to the Internet isdisplayed.2Connecting to an Internet radio station for the firsttime:Press ENTER or GG.3Press ENTER or GG once again.• The latest list of radio stations is downloaded from the vTunersite. (Several minutes are required for this download.)4Press DD HH to select the desired setting item, thenpress ENTER or GG.Finally, the list of Internet radio stations is displayed and thosethat can be played are indicated by the “∗” mark in front ofthem.5Press DD HH to select the desired radio station, thenpress ENTER or GG.• Connection starts, and the station starts playing once thebuffer reaches “100 %”.During playback, press ENTER once to pause playback, then pressENTER again to resume playback.If ENTER is pressed and held in for more than two seconds whenin the play or pause mode, playback stops and the previous menuwindow reappears.6ENTERD H F G[AUX]About the button names in this explanation< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only :Buttons on the main unit and remote control unitENTER D H F G