Denon AVR-687 Operating Instructions Manual

Also see for AVR-687: Service manual Service manual Specifications Dimensions

Basic Operation Basic OperationENGLISH24ENGLISHSelecting the DTS NEO:6 modeIt is possible to play analog input signals and digital input signals (2-channels) in the surround mode.Press SURROUND PARAMETER.Play a program source.Press FF GG to select the play mode.Press DD HH to select the item, then press FF GG to set.The mode switches as shown below each time the button ispressed.• When the CINEMA mode:Press ENTER or SURROUND PARAMETER.CNTR. IMAGE:The expansion of the center channel can be adjusted. (0.0 to 1.0,default : 0.3)23456Press [STANDARD] to select “DTS NEO:6”.DOLBY PLIIxNEURAL SURROUNDDTS NEO:61CINEMA:This mode is optimum for playing movies. Decoding is performedwith emphasis on separation performance to achieve the sameatmosphere with 2-channel sources as with 6.1-channel sources.MUSIC:This mode is suited mainly for playing music.MODE CINEMA CINEMA EQDEFAULT SURROUND BACKTONE DEFEATIf you do want the bass and treble to be adjusted, turn off thetone defeat mode.When “MUSIC” mode is selected:MODE MUSIC CENTER IMAGESURROUND BACKTONE DEFEATDEFAULT• When the MUSIC mode:Selecting the NEURAL SURROUND modeIt is possible to play analog input signals and digital input signals (2-channels) in the surround mode.This is the optimum mode for playing sources recorded in XM HDSurround ( page 32).Play a program source.Press SURROUND PARAMETER.Press [STANDARD] to select “NEURAL SURROUND”.132Press DD HH to select the item, then press FF GG to set.CINEMA EQ TONE DEFEATDEFAULT SURROUND BACKPress ENTER or SURROUND PARAMETER.54DOLBY PLIIxNEURAL SURROUNDDTS NEO:6