Denon AVR 689 - AV Receiver Owner's Manual

Also see for AVR 689 - AV Receiver: Specifications Specification Setup guide Dimensions Product sheet

Denon AVR 689 - AV Receiver Owner's Manual Manual pdf 42 page image

SpecificationsPreparations1 Press .The power indicator lights red and the power is set to the standbymode.2 Press or [ON/SOURCE].The power indicator flashes green and the power turns on.b Also press [SOURCE SELECT] when in standby mode, the powerturns on. In this case the input source is selected by remotecontrol unit.b Also press [QUICK SELECT] when in standby mode, the powerturns on. In this case Quick Select is selected by remote controlunit (vpage 46).Turning the Power Offq Press or [OFF].The power is set to the standby mode.w Press .The power indicator turns off, and so does the power.NOTEPower continues to be supplied to some of the circuitry even when thepower is in the standby mode. When leaving home for long periods oftime or when traveling, either press to turn off the power,or unplug the power cord from the power outlet.Turning the Power OnSelecting the Input SourceSelect the source using SOURCE SELECT.Turn or press [SOURCE SELECT] to switchbetween input sources.If “Rec Select” is selected for the input source, press before turning .Setting the Input ModeSet the input mode for this source.• When a digital signal is properly input, the “ ” indicator lightson the display. If the “ ” indicator does not light, check thedigital input connector assignment and the connections.• The surround mode cannot be set if the input mode is set to “EXT.IN”.• Only set “PCM” and “DTS” when playing the respective signals.[Selectable items]Auto : Detect type of digital input signal and decode and playautomatically.PCM : Decode and play only PCM input signals.DTS : Decode and play only DTS input signals.Analog : Play only signals from analog input.EXT. IN : Play only signals from EXT. IN input.Press or [INPUT].Each time you press the button, the input mode display will change.Auto PCM DTSAnalogEXT. IN BANDTUNING

SOURCE SELECT [OFF]SOURCE SELECT[QUICK SELECT][SOURCECONTROL 1][SOURCECONTROL 2][ON/SOURCE][MASTERVOLUME][MUTING][TUNER]TUNINGSOURCESELECTTUNING[MODE][TUNER][V.SEL]BAND[INPUT][Front] [Rear]Button located on both the main unit and the remote controlunit BUTTONButton only on the main unit