71AVR-1905/785 AVC-1590NOTE FOR SCHEMATIC DIAGRAMWARNING:Parts marked with this symbol ! have critical characteristics.Use ONLY replacement parts recommended by the manufactur-er.CAUTION:Before returning the unit to the customer, make sure you makeeither (1) a leakage current check or (2) a line to chassis resis-tance check. If the leakage current exceeds 0.5 milliamps, or ifthe resistance from chassis to either side of the power cord isless than 460 kohms, the unit is defective.WARNING:DO NOT return the unit to the customer until the problem is lo-cated and corrected.NOTICE:ALL RESISTANCE VALUES IN OHM. k=1,000 OHMM=1,000,000 OHMALL CAPACITANCE VALUES IN MICRO FARAD.P=MICRO-MICRO FARADEACH VOLTAGE AND CURRENT ARE MEASURED ATNO SIGNAL INPUT CONDITION.CIRCUIT AND PARTS ARE SUBJECT TO CHANGEWITHOUT PRIOR NOTICE.SIGNAL LINEμ