Denon AVR-983 Operating Instructions Manual

Also see for AVR-2803: Service manual Brochure & specs Control protocol Code List Operating instructions

Contents

Denon AVR-983 Operating Instructions Manual Manual pdf 33 page image

33Preset memory131212Press the power ON/SOURCE button and the OFF button atthe same time.• The LEARNED/TX indicator flashes.Press the mode button of the equipment that is to be enteredto a preset memory.• The mode button flashes.345When stored correctly, the mode button and theLEARNED/TX indicator will light.Referring to the included List ofPreset Codes, use the numberbuttons to input the preset code (a4-digit number) for themanufacturer of the componentwhose signals you want to store inthe memory.To store the codes of another component in the memory,repeat steps 1 to 4.The preset codes are as follows upon shipment from the factory and after resetting:TV, VCR ........................................................................HITACHICD, TAPE .....................................................................DENONCDR/MD.......................................................................DENON (CDR)DVD/VDP......................................................................DENON (DVD)DBS/CABLE .................................................................ABC (CABLE)NOTES:• Depending on the model and year of manufacture, this function cannot be used for some models, even if the your device is listed on theincluded list of preset codes.• Some manufacturers use more than one type of remote control code. Refer to the included list of preset codes to change the number andcheck it out.• The preset memory can be set for one component only among the following: CDR/MD, DVD/VDP and DBS/CABLE.The included remote control unit can be used to operate devices of different brands by registering the preset number corresponding to the brandof your device.For some models the remote control unit or the device may not operate properly. In this case, use the learning function (page 36) to store yourdevice’s remote control signals in the included remote control unit.1 2 34 5 67 8 90DVD preset codesB Model No.DVD-900DVD-1000DVD-1500DVD-2800DVD-2800IIDVD-3800DVD-9000DVM-1800DVM-4800DVD-800DVD-1600DVD-2000DVD-2500DVD-3000DVD-33000000 0001