SOURCE SELECTMASTER VOLUMESPEAKERPlaybackAbout the button names in these explanations<>: Buttons on the main unit[]: Buttons on the remote control unitButton name only:Buttons on the main unit and remote control unitPreparations1Press.The power indicator lights red and the power is set to the standbymode.2Pressor[POWER ON].The power indicator flashes green and the power turns on.Turning the Power OffqPressor[POWER OFF].The power is set to the standby mode.wPress.The power indicator turns off, and so does the power.NOTEPower continues to be supplied to some of the circuitry even whenthe power is in the standby mode. When leaving home for long periodsof time or when traveling, either pressto turn off the power,or unplug the power cord from the power outlet.Turning the Power OnEither turnor press[MASTERVOLUME].Operations During PlaybackAdjusting the Master VolumePress[MUTING].To cancel, press[MUTING]again. Muting can also be canceled byadjusting the master volume.Plug the headphones into.The sound from the speakers and pre-out connectors is automaticallycut.NOTEBe careful not to set the volume too high when using headphones.Turning Off the Sound Temporarily (Muting)Listening with HeadphonesSelecting the input sourceOperation on the main unitTurn.If “Rec Select” or “Video Select” is selected for the input source,pressbefore turning.Set[MODESELECTOR1]to“AUDIO”thenpress[SOURCE SELECT].The desired input source can be selected directly.[TUNER]SOURCESELECT[POWER OFF][SHIFT]MASTERVOLUME[CHANNEL][POWER ON][MUTING]SPEAKER[MODESELECTOR 1][MODESELECTOR 2]Getting StartedConnectionsSetupPlaybackRemote ControlMulti-ZoneInformationTroubleshootingPressSPEAKER.Front AFront BFront A+BSwitching the front speakersOperation on the remote control unitSOURCESELECT[TUNING][TUNER][MODE][BAND][MEMORY]
