Denon AVR-990 Owner's Manual

Also see for AVR-990: Specification Before Upgrading Guide Getting started Service manual Service manual

Contents

Denon AVR-990 Owner's Manual Manual pdf 7 page image

ENGLISH Connections Settings Playback Information SpecificationsGetting Started Unavailable Functions After UpgradingWhen Using the Front Wide SpeakersGExample qH GExample wH( : Measuring positions)FWLFL SW C FRFWRFL SW C FRSRSL* MFWLFL SW C FRFWRFL SW C FRSRSL*MFL : Front speaker (L) C : Center speakerFR : Front speaker (R) SW : SubwooferFHL : Front height speaker (L) SL : Surround speaker (L)FHR : Front height speaker (R) SR : Surround speaker (R)FWL : Front wide speaker (L) SBL : Surround back speaker (L)FWR : Front wide speaker (R) SBR : Surround back speaker (R)nThe acoustic characteristics of the connected speakers andlistening room are measured and the optimum settings are madeautomatically.Audyssey Auto Setup Flowna Connect the Included Setup Microphoned Perform Audyssey Auto Setups Audyssey Auto Setup PreparationsChange the Amplifier Assignment(Amp Assign) (vpage 7)When upgrading, contents of “Amp Assign” are modified.Set the channel to be measured (Channel Select)nnCheck the Measuring Results and EqualizerType after Audyssey Auto Setup(Parameter Check)Make the Optimal Speaker Settings, and Correct the Room Acoustics(Audyssey™ Auto Setup)Audyssey MultEQ® automatically measures the acoustical problemsin the listening environment to create the best audio experience foryour home theater.• When Audyssey™ Auto Setup procedure is performed, the MultEQ®,Dynamic EQ® and Dynamic Volume™ functions (vpage 13 ~15)are enabled.• Use the included setup microphone (DM-A409) to perform AudysseyAuto Setup procedure.• Measurements are performed by placing the calibrated microphonesuccessively at multiple positions throughout the listening area asshown in GExample qH. For best results, it is strongly recommendedto measure 6 positions so that the measurements have the properspatial weighting.Even if the listening environment is small as shown in GExample wH,measuring at multiple points throughout the listening environmentresults in more effective correction.When using Front Height SpeakersGExample qH GExample wHFHL FL SW C FR FHRSL SR* MFHL FL SW C FR FHRSL SR*M( : Measuring positions)nImportant InformationAbout the main listening position (*M)The main listening position refers to the most central position whereone would normally sit within the listening environment.MultEQ® uses the measurements from this position to calculatespeaker distance, level, polarity, and the optimum crossover valuefor the subwoofer.See overleafSettings