Denon AVR-E200 Getting Started

Also see for AVR-E200: Owner's manual Service manual Service manual Getting started

Contents

6ENGLISHFRANÇAISESPAÑOLPORTUGUÊSESPAÑOLNEDERLANDSSVENSKAConnect PlaybackSetupPreparationFor optimum surround playback, adjustment of the distance of speakers andsound level of each channel, using the test tone, are required, depending on theenvironment for speakers to be used.The settings for the following 5 items should be made:BassCrossoversLevelsDistancesSpeaker Config.Indicate speaker presence and select speaker sizecategories based on bass reproduction capability.Set distance from listening position to speakers.Measure beforehand the distance from the listeningposition to each speaker.Set the volume of the test tone to be the same whenit is output from each speaker.Set the maximum frequency of the bass signaloutput from each channel to the subwoofer.Set the Crossover Frequency to suit the bassreproduction capability of the speaker being used.Set subwoofer and LFE signal range playback.Menu operation1 Press SETUP.The menu is displayed on the TV screen ofthis unit.InputsSpeakersGeneralInput AssignSource LevelInput SelectVideo SourceSetup MenuEnter ReturnENTER BACK2 Use ui to select“Speakers”,and then pressENTER.CH LEVEL SLEEP DIMMER SEARCHMODESHIFTBANDMEMORYCBL /SATBlu-rayDVDGAMEAUXVOLUMEINFO AUDIOBACK SETUPMUTETONERESTORERNIGHTRC-1170SURROUND AUDIO DELAYTV AUDIO CHANNEL TUNETUNERPOWERQUICK SELECTENTER21 3 43 Use ui to select the menu to be setor operated, and then press ENTER.4 Use o p to select a detailed setting,and then press ENTER.• To return to the previous item, press BACK.• Exiting the Menu, press SETUP while the menuis displayed.The menu display disappears.Set up speakersSpeaker Config.1 Press SETUP.The menu is displayed on the TV screen ofthis unit.InputsSpeakersGeneralInput AssignSource LevelInput SelectVideo SourceSetup MenuEnter ReturnENTER BACK2 Use ui to select “Speakers”, andthen press ENTER.Speaker Config.DistancesLevelsCrossoversBassFrontCenterSurroundSubwooferSpeakersEnter ReturnENTER BACK3 Use ui to select “Speaker Config.”,and then press ENTER.1 Speaker Config.Enter ReturnENTER BACKFrontCenterSurroundSubwooferSmallSmallSmallYesNOTEDo not use the outward shape or size of thespeaker to determine selection of a “Large” or“Small” speaker. Instead, use the frequencies setin “Crossovers” (vpage 8) as the standardfor determining bass reproduction capability.vSee overleaf