Denon AVR-E400 Service Manual

Also see for AVR-E400: Getting started guide Owner's manual Getting started Quick start guide

Contents

Denon AVR-E400 Service Manual Manual pdf 12 page image

DISASSEMBLY• Disassemble in order of the arrow in the following figure.• In the case of the re-assembling, assemble it in order of the reverse of the following flow.• In the case of the re-assembling, observe "attention of assembling".• If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly asthey were originally bundled or placed afterward.Otherwise, incorrect arrangement can be a cause of noise generation.FRONT PANEL ASSYRefer to "DISASSEMBLY1. FRONT PANEL ASSY"and "EXPLODED VIEW"PCB FRONT HDMI ASSY(Ref. No. of EXPLODED VIEW : P1)PCB USB ASSY(Ref. No. of EXPLODED VIEW : P2)PCB FRONT ASSY(Ref. No. of EXPLODED VIEW : P3)PCB FUNCTION ASSY(Ref. No. of EXPLODED VIEW : P4)PCB CNT ASSY(Ref. No. of EXPLODED VIEW : P5)PCB F/H_GUIDE ASSY(Ref. No. of EXPLODED VIEW : P6)RADIATOR ASSYRefer to "DISASSEMBLY7. RADIATOR ASSY"and "EXPLODED VIEW"PCB AMP ASSY(Ref. No. of EXPLODED VIEW : P7)PCB GUIDE R(Ref. No. of EXPLODED VIEW : P17)PCB TOP_GUIDE(Ref. No. of EXPLODED VIEW : P18)POWER TRANS MAINRefer to "DISASSEMBLY4. POWER TRANS MAIN"and "EXPLODED VIEW"POWER TRANS(Ref. No. of EXPLODED VIEW : 13)TOP COVERPCB HDMIRefer to "DISASSEMBLY3. PCB HDMI"and "EXPLODED VIEW"PCB HDMI ASSY(Ref. No. of EXPLODED VIEW : P13)PCB MX PORT/PCB RS232C(AVR-X2000E3 only)Refer to "DISASSEMBLY2. PCB MX PORT/PCB RS232C"and "EXPLODED VIEW"PCB RS232C ASSY(Ref. No. of EXPLODED VIEW : P14)PCB MX PORT ASSY(Ref. No. of EXPLODED VIEW : P15)PCB VIDEO ASSYRefer to "DISASSEMBLY5. PCB VIDEO ASSY"and "EXPLODED VIEW"PCB MAIN ASSY(Ref. No. of EXPLODED VIEW : P9)PCB INPUT ASSY(Ref. No. of EXPLODED VIEW : P10)PCB FRONT CNT ASSY(Ref. No. of EXPLODED VIEW : P11)PCB VIDEO ASSY(Ref. No. of EXPLODED VIEW : P12)BACK CHASSISPCB SMPSRefer to "DISASSEMBLY6. PCB SMPS"and "EXPLODED VIEW"PCB SMPS ASSY(Ref. No. of EXPLODED VIEW : P8)12