o Power does not turn on / Power is turned offSymptom Cause / Solution PagePower does not turn on. 0 Check whether the power plug is correctly inserted into the power outlet. 53Power automatically turnsoff.0 The sleep timer is set. Turn on the power again. 1270 “Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. Todisable “Auto Standby”, set “Auto Standby” on the menu to “Off”.190Power turns off and thepower indicator flashes inred approx. every 2seconds.0 The protection circuit has been activated due to a rise in temperature within this unit. Turn the power off,wait about an hour until this unit cools down sufficiently, and then turn the power on again.2410 Please re-install this unit in a place having good ventilation. －Power turns off and thepower indicator flashes inred approx. every 0.5seconds.0 Check the speaker connections. The protection circuit may have been activated because speaker cablecore wires came in contact with each other or a core wire was disconnected from the connector andcame in contact with the rear panel of this unit. After unplugging the power cord, take corrective actionsuch as firmly re-twisting the core wire or taking care of the connector, and then reconnect the wire.280 Turn down the volume and turn on the power again. 550 This unit’s amplifier circuit has failed. Unplug the power cord and contact our customer service center. －Power does not turn offeven when the powerbutton is pressed, and thedisplay shows “ZONE2On”.0 The power supply of ZONE2 is turned to ON. To turn off the power supply of this unit (standby), press theZONE2 ON/OFF on the main unit, or press the X button on the remote control unit to turn off the powersupply of ZONE2.－Contents Connections Playback Settings Tips Appendix202Front panel Display Rear panel Remote Index
