Denon AVR-X1100W Service Manual

Also see for AVR-S700W: Quick start guide Owner's manual Quick start guide Instructions

Contents

TECHNICAL SPECIFICATIONS FOR AVR-X1100Wn Audio section• Power amplifierRated output :Front :80W+80W（8Ω、20Hz～20kHz with 0.08％ T.H.D.）120W+120W（6Ω、1kHz with 0.7％ T.H.D）Center :80W（8Ω、20Hz～20kHz with 0.05％ T.H.D.）120W（6Ω、1 kHz with 0.7 % T.H.D.)Surround :80W+80W（8Ω、20 Hz – 20 kHz with 0.08% T.H.D.)120W+120W（6Ω、1 kHz with 0.7 % T.H.D.)Surround back:80W+80W（8Ω、20 Hz – 20 kHz with 0.08% T.H.D.)120W+120W（6Ω、1 kHz with 0.7 % T.H.D.)Output connectors : 4～16Ωn Analog sectionInput sensitivity/Input impedance : 200 mV/47 kΩFrequency response : 10 Hz – 100 kHz — +1, –3 dB（Direct mode）S/N : 98 dB（IHF–A weighted, Direct mode）n Video sectionInput/output level and impedance : 1 Vp-p, 75 ΩFrequency response : 5 Hz – 10 MHz — 0, –3 dBn Tuner sectionReception frequency range : FM 87.5 MHz – 107.9 MHz(for E3)FM 87.5 MHz – 108.0 MHz(for E2,E1. E1C)FM 76.0 MHz – 90.0 MHz(for JP)AM 520 kHz – 1710 kHz(for E3)AM 522 kHz – 1611 kHz(for E2,E1. E1C)AM 522 kHz – 1629 kHz(for JP)Effective sensitivity : FM 1.2μV（12.8dBf）AM 18 μV50 dB sensitivity : MONO ― 2.8 μV (20.2 dBf)S/N: MONO ― 70 dB (IHF–A weighted, Direct mode)STEREO ― 67 dB (IHF–A weighted, Direct mode)Distortion : MONO ― 0.7 % (1 kHz)SRETEO ― 1.0 % (1 kHz)n Wireless LAN sectionNetwork type(wireless LAN standard): Conforming to Wi-Fi®z1Security : WEP 64 bit, WEP 128 bitWPA/WPA2-PSK (AES)WPA/WPA2-PSK (TKIP)Radio frequency : 2.4 GHzNo. of channels : 1 – 11 ch (for E3)1 – 13 ch (for E2, E1, E1C, JP)z1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-ProductLogo are registered trademarks of the Wi-Fi Alliance.n Bluetooth sectionCommunications system : Bluetooth Version 2.1 + EDR(Enhanced Data Rate)Transmission power : Maximum 2.5 mW (Class 2)Maximum communication range : Approx. 32.8 ft/10m 2 in line of sightFrequency band : 2.4 GHz bandModulation scheme : FHSS (Frequency-Hopping Spread Spectrum)Supported profiles : A2DP 1.2 (Advanced Audio Distribution Profile)AVRCP 1.4 (Audio Video Remote Control Profile)Corresponding codec : SBC, AACTransmission range (A2DP) : 20 Hz - 20,000 Hzn GeneralPower supply : (for E3) : AC 120 V, 60 Hz(for E2/E1) : AC 230 V, 50 Hz / 60Hz(for E1C) : AC 220 V, 50 Hz(for JP) : AC 100V、50/60HzPower consumption : 430WPower consumption in standby mode : 0.1WPower consumption in CEC standby mode : 0.5WPower consumption in network standby mode : 2.7WDIMENSION FOR AVR-X1100WUnit： Unit : in. (mm) Weight： 18 lb 15 oz (8.6 kg)7 3/4 (197)1 47/64(44)1 27/32(47)17 3/32 (434)19/32(15) 5 23/64 (136)5 15/16 (151)8 15/32 (215)13 35/64 (344)2 23/64(60)1 49/64 (45) 1 49/64 (45)11 11/32 (288)13 11/32 (339)3/4(19) 1 7/32(32)9