Denon AVR-X2100W Service Manual

Also see for AVR-S900W: Owner's manual Quick start guide Product information Service manual

Contents

Denon AVR-X2100W Service Manual Manual pdf 9 page image

TECHNICAL SPECIFICATIONS FOR AVR-X2100Wn Audio section• Power amplifierRated output :Front :95W+95W(8Ω, 20Hz - 20kHz with 0.08% T.H.D.)125W+125W(6Ω, 1kHz with 0.7% T.H.D)Center :95W(8Ω, 20Hz - 20kHz with 0.08% T.H.D.)125W(6Ω, 1 kHz with 0.7 % T.H.D.)Surround :95W+95W(8Ω, 20 Hz - 20 kHz with 0.08% T.H.D.)125W+125W(6Ω, 1 kHz with 0.7 % T.H.D.)Surround back:95W+95W(8Ω, 20 Hz - 20 kHz with 0.08% T.H.D.)125W+125W(6Ω, 1 kHz with 0.7 % T.H.D.)Output connectors : 4 - 16Ωn Analog sectionInput sensitivity/Input impedance : 200 mV/47 kΩFrequency response : 10 Hz - 100 kHz — +1, -3 dB(Direct mode)S/N : 100 dB(IHF-A weighted, Direct mode)n Video sectionInput sensitivity/Input impedance : Y signal — 1 Vp-p, 75 ΩPB / CB signal — 0.7 Vp-p, 75 ΩPR / CR signal — 0.7 Vp-p, 75 ΩFrequency response : 5 Hz - 60 MHz — 0, -3 dBn Tuner sectionFMReception frequency range : FM 87.5 MHz - 107.9 MHz(for E3)FM 87.5 MHz - 108.0 MHz(for E2,E1. E1C)FM 76.0 MHz - 90.0 MHz(for JP)AM 520 kHz - 1710 kHz(for E3)AM 522 kHz - 1611 kHz(for E2,E1. E1C)AM 522 kHz - 1629 kHz(for JP)Effective sensitivity : FM 1.2μV(12.8dBf)AM 18 μV50 dB sensitivity : MONO ― 2.8 μV (20.2 dBf)S/N: MONO ― 70 dB (IHF-A weighted, Direct mode)STEREO ― 67 dB (IHF-A weighted, Direct mode)Distortion : MONO ― 0.7 % (1 kHz)SRETEO ― 1.0 % (1 kHz)n Wireless LAN sectionNetwork type(wireless LAN standard): Conforming to Wi-Fi®z1Security : WEP 64 bit, WEP 128 bitWPA/WPA2-PSK (AES)WPA/WPA2-PSK (TKIP)Radio frequency : 2.4 GHzNo. of channels : 1 - 11 ch (for E3)1 - 13 ch (for E2, E1, E1C, JP)z1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-ProductLogo are registered trademarks of the Wi-Fi Alliance.n Bluetooth sectionCommunications system : Bluetooth Version 2.1 + EDR(Enhanced Data Rate)Transmission power : Maximum 2.5 mW (Class 2)Maximum communication range : Approx. 32.8 ft/10 m 2 in line of sightFrequency band : 2.4 GHz bandModulation scheme : FHSS (Frequency-Hopping Spread Spectrum)Supported profiles : A2DP 1.2 (Advanced Audio Distribution Profile)AVRCP 1.4 (Audio Video Remote Control Profile)Corresponding codec : SBC, AACTransmission range (A2DP) : 20 Hz - 20,000 Hzn GeneralPower supply : (for E3) : AC 120 V, 60 Hz(for E2/E1) : AC 230 V, 50 Hz / 60Hz(for E1C) : AC 220 V, 50 Hz(for JP) : AC 100V, 50/60HzPower consumption : 500WPower consumption in standby mode : 0.1WPower consumption in CEC standby mode : 0.5WPower consumption in network standby mode : 2.7WFor purposes of improvement, specifications and design are subject tochange without notice.DIMENSION FOR AVR-X2100WUnit： Unit : in. (mm) Weight： 21 lb 6 oz (9.7 kg)17 3/32 (434)6 1/2 (165)2 1/8(54)2 23/32(69)19/32(15) 5 63/64 (152)6 37/64 (167)9 1/4 (235)11 11/32 (288)13 11/32 (339)3/4(19) 1 17/64(32)13 35/64 (344)2 23/64(60)1 49/64 (45) 1 49/64 (45)9