o HDMI Audio (ZONE2 only)Selects the audio signal format for playing an HDMI source in ZONE2.Through(Default):The HDMI audio signal is passed throughthis unit to the device in ZONE2.PCM:The HDMI audio signal input into this unitis converted to a PCM signal that can beoutput from the ZONE2 PRE OUTconnectors or speaker terminals.o Volume LevelSet the volume output level.Variable(Default): Volume can be adjusted.1 – 98(–79.5 dB – 18.0 dB):Volume is fixed at the desired level. Thevolume cannot be adjusting using theremote control unit.o Volume LimitMake a setting for maximum volume.60 (-20 dB) / 70 (-10 dB) / 80 (0 dB)(Default : 70 (-10 dB))Off: Do not set a maximum volume.0 This can be set when “Volume Level” is set to “Variable”. (v p. 220)o Power On VolumeDefine the volume setting that is active when the power is turned on.Last(Default):Use the memorized setting from the lastsession.Mute: Always use the muting on condition.1 – 98(–79.5 dB – 18.0 dB): The volume is adjusted to the set level.0 This can be set when “Volume Level” is set to “Variable”. (v p. 220)Contents Connections Playback Settings Tips Appendix220Front panel Display Rear panel Remote Index
