8ENGLISH3 PART NAMES AND FUNCTIONS(1) Front Panel5 OPEN/CLOSESKIPTUNER AUXON/STANDBYVOL.UPDOWNPLAY MODE C Dq wt ui oer yREMOTESENSORPHONESVERTICAL LOADING SYSTEMCOMPACT DISC PLAYERPERSONAL AUDIO SYSTEM / CD STEREO RECEIVER40-STATION PRESET MEMORY6-MODE PRESET EQUALIZER!0 !1!4 !2!3q Power Operation Switch (ON/STANDBY)• Press to switch on the power and press again to setthe standby mode.w TUNER Button• Press to switch the input to “TUNER”.e External Input Selection Button (AUX)• See Page 6.r Play Mode Select Button (PLAY MODE)• See Page 23.t Skip Button (8/9)• Permits fast reverse and forward of the track.• Used to adjust the reception frequency when thefunction is set to tuner.y CD Play/Pause Button (CD 1/3)• Press to switch the input to “CD” and start playingthe CD if one has been loaded.• Press again to pause the track.u CD Stop Button (CD 2)• Use to stop play or recording.• Press to switch the input to “CD”.i Volume Control Button (VOL. UP/DOWN)• Use to lower or raise the volume.o CD Door Open/Close Button (5)• Press and the CD door goes down.• Press again and the CD door goes up.!0 CD Door• A press of the CD Door Open/Close button makes thedoor go down and allows a CD to be loaded.!1 Speakers!2 REMOTE SENSOR• Aim the supplied remote control at this sensor andoperate.!3 Display• See Page 9.!4 Headphone Jack (PHONES)• Allows the use of headphones (available on themarket).• Insertion of the headphone plug switches off thesound from the speakers and allows you to listen justfrom the headphones.