30DBP-1610FLOW CHART NO.19Audio is not outputted normally. (JK2200, JK2201)Set the disc on the disc tray, and playback.Is the signal at Pin(24) of IC2000 "H" ?Are the analog audio signals outputted to each pinof CN2007?Is the "H" level mute signal outputted to CN2007?CN2007 22PIN AUDIO(L)CN2007 24PIN AUDIO(R)CN2007 19PIN AUDIO(L)-MUTECN2007 20PIN AUDIO(R)-MUTEIC2200 7PIN AUDIO(L)IC2200 1PIN AUDIO(R)IC2200 6PIN AUDIO(L)IC2200 2PIN AUDIO(R)Replace the BD Main CBA & BD MechanismAssembly.Replace the BD Main CBA & BD MechanismAssembly.Replace IC2200.Check the periphery between Pin(1,7) of IC2200and the audio terminal (JK2200, JK2201), andservice it if detective.Check each line between each pin of CN2007and each pin of IC2200, and service it if detective.CN2007 22PIN → IC2200 6PIN AUDIO(L)CN2007 24PIN → IC2200 2PIN AUDIO(R)Are the analog audio signals inputted to each pinof IC2200?Are the analog audio signals outputted to each pinof IC2200?Are the audio signals outputted to the audioterminal (JK2200, JK2201)?YesYesYesYesYesNoCheck AUDIO-MUTE line, and service it ifdetective.NoNoNoNoNo