56AppendixSettingsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteTips2 Cannot playback CDsSymptom Cause / Solution PageCannot playback when the play buttonis pressed, or cannot correctly playback a specific part of the disc.• The CD is dirty or scratched. Either clean the CD, or insert a different CD. 64Cannot playback CD-R/CD-RW. • CDs cannot be played back unless they have been finalized. Use a finalized disc.• This may be caused by poor recording conditions, or the disc itself may be of poor quality. Usea correctly recorded disc.• The DATA CD playback function of this unit only supports playback of MP3 and WMA files.58, 65–59“TRACK0 0m00s” is displayed. • “TRACK0 0m00s” is displayed if a disc that cannot be played is loaded. 63“NO DISC” is displayed. • “NO DISC” is displayed if the disc is loaded upside-down or if no disc is loaded. 632 Files on my computer cannot be playedSymptom Cause/Solution Page“Unsupported” is displayed. • “Unsupported” is displayed when audio signals that are not supported by this unit are input.Check the settings on your computer or player software.• If the computer you use is “Mac OS“, please check if the “USB High Speed Audio“ format isset below “192000.0 Hz“ using the “Audio MIDI Setup“.––2 iPod cannot be played backSymptom Cause/Solution PageiPod cannot be connected or “CHECKiPod” is displayed.• When using iPod by connecting it to the USB port, some iPod variations are not supported.• When iPod is connected by using a USB cable other than the genuine cable, iPod may not berecognized. Use a genuine USB cable.23–