Denon DCD-2010AE Owner's Manual

Contents

Denon DCD-2010AE Owner's Manual Manual pdf 18 page image

ENGLISHGetting Started Connections Troubleshooting Specifi cationsPlayable USB Memory FormatsFiles stored on USB memory devices created in the formats belowcan be played.File FormatMP3 (MPEG-1 Audio Layer-3)WMA (Windows Media Audio)USB-Compatible File Systems“FAT16” or “FAT32”b If the USB memory device is divided into multiple partitions, onlythe top drive can be selected.Tag DataID3-Tag (Ver.1.x and 2.x)META-Tag(Compatible with title, artist and album names)Maximum number of playable fi les and foldersMaximum number of fi les in a folder: 255Maximum number of folders: 255USB PlaybackOnly music fi les that are not copyright-protected can be played onthis set.b Contents downloaded from pay sites on the Internet are copyrightprotected. Also, fi les encoded in WMA format when ripped from aCD, etc., on a computer may be copyright protected, depending onthe computer’s settings.Playable MP3/WMA fi leFile format Samplingfrequency Bit rate ExtensionMP3 32, 44.1, 48 kHz 32 ~ 320 kbps .mp3WMA 32, 44.1, 48 kHz 64 ~ 192 kbps .wma1 Playback preparation (“Before Playing a USB or aniPod” vpage 8).2 Press [MODE SELECT] to select the folder mode ordisc mode.b Refer to “Folder mode and disc mode settings” (vpage 11).3 Press 1/3.Playback starts.Playing USB Memory devicen To Switch the Folder or File During Playback• FolderUse [u, i] to select the folder, then press [ENTER].• FileUse [o, p] to select the fi le, then press [ENTER].Use 8, 9 to select the fi le.b The fi le numbers are set automatically when the USB memorydevice is loaded.n Stopping PlaybackPress 2.n Stopping Playback TemporarilyPress 1/3.The “3” is displayed.b To resume playback, press 1/3.n Fast-Forwarding and Fast-Reversing (searching)During playback, press and hold in [6, 7].8, 9SOURCE1/32[MODE SELECT][TITLE/ARTIST][RESTORER][CD POWER][ENTER][PLAY SELECT][REPEAT]8, 9[6, 7]1/3[TIME]SOURCE2[uiop]Button located on both the main unitand the remote control unit BUTTONButton only on the main unit