Denon DCD-2020AE Owner's Manual

Also see for DCD-2020AE: Getting started guide

Contents

Denon DCD-2020AE Owner's Manual Manual pdf 17 page image

14Playing a USB memory devicePlaying files stored on USB memory device1 Press CD X to turn on power tothe unit.2 Press SOURCE to set the playbackmedia mode to “USB”.3 Press MODE SELECT to selectthe “Folder mode” or “Memorymode”.n About the display• When “Folder mode” is selectedAll the files in the selected folder areplayed.• When “Memory mode” is selectedAfter the selected folder and files areplayed, all the files in all the folders areplayed.4 Use ui to select the folder to beplayed.5 Use 8, 9, o or p to selectthe file to be played.6 Press 1/3.Playback starts.Disconnecting the USB memory deviceq Press 2.w Make sure that the communications indicator on the USB memorydevice is not flashing, and disconnect the USB memory device.n To switch the folder or file during playback• FolderUse ui to select the folder, then press ENTER.• FileUse o p to select the file, then press ENTER.Use 8 or 9 to select the file.• The file numbers are set automatically when the USB memorydevice is loaded.n Switching the displayDuring playback, press TITLE/ARTIST.• While an MP3/WMA/AAC is being played backTitle nameAlbum nameArtist name• While a WAV file is being played back, only the file name isdisplayed.• The player can display the following characters:ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789! ” # $ % & : ; < > ? @ l [ ] _ ` | { } ~ ^ ’ ( ) * + , - . / = (space)n Operations enabled during playback(vpage 15)• USB memory devices will not work via a USB hub.• DENON does not guarantee that all USB memory devices willoperate or be suppled power. When using a USB connection typeportable hard disk of the type for which power can be supplied byconnecting an AC adapter, we recommend using the AC adapter.NOTEDENON will take no responsibility whatsoever for any loss or damageto data on a USB memory device when using it connected to the unit.