|
Getting Started Connections TroubleshootingENGLISH SpecificationsPlaying Tracks in the Desired OrderUp to 25 tracks can be programmed.1 In the stop mode, press [PROGRAM/DIRECT].“PGM” is displayed.2 Use [NUMBER] (0 ~ 9, +10) to select the traks.GExampleH To program tracks 3, 12, 7 to play in that order:Press [PROGRAM/DIRECT], [3], [+10], [2], [7].3 Press <1/3> or [1].Playback starts in the programmed order.n Checking the order of the programmed tracksIn the stop mode, press [CALL].The track numbers are displayed in the programmed order eachtime the button is pressed.n To clear the last track programmedIn the stop mode, press [CLEAR].The last track programmed is cleared each time the button ispressed.n To clear one programmed track at a timeIn the stop mode, press [CALL] to select the track to be cleared,then press [CLEAR].n Clearing the all programmed trackIn the stop mode, press [PROGRAM/DIRECT].• When [REPEAT] is pressed during program playback, the tracks areplayed repeatedly in the programmed order.• When [RANDOM] is pressed during program playback, theprogrammed tracks are played in random order.There are many music distribution sites on the Internet allowing youto download music files in MP3 or WMA (Windows Media® Audio)format. The music (files) downloaded from such sites can be storedon CD-R or CD-RW discs and played on the DCD-710AE.“Windows Media” and “Windows” are registered trademarks ortrademarks in the United States and other countries of MicrosoftCorporation of the United States.File formatMPEG-1 Audio Layer-3WMA (Windows Media Audio)Playable MP3/WMA fileFile format Samplingfrequency Bit rate ExtensionMP3 32, 44.1, 48 kHz 32 ~ 320 kbps .mp3WMA 32, 44.1, 48 kHz 64 ~ 192 kbps .wmaAbout the MP3 and WMA Formats ThatCan be PlayedCD-R and CD-RW discs created in the format described below canbe played.Writing software formatISO9660 level 1b When written in other formats, it may not be possible to play thedisc properly.Maximum number of playable files and foldersTotal number of folders and files : 512Number of folders : 256Tag dataID3-Tag (Ver. 1.x and 2.x )META-Tag(Compatible with title, artist and album names)Playback of MP3 and WMA Files1 In the stop mode, press [RANDOM].The “RANDOM” indicator lights.2 Press <1/3> or [1].The tracks start playing in random order.Playing Random Order n Stopping Random PlaybackIn the stop mode, press [RANDOM].The “RANDOM” indicator turns off.When [REPEAT] is pressed during random playback, the tracks areplayed in a different random order after this turn.NOTEDirect searching is not possible during random playback.• Be sure to give files the extension “.MP3” or “.WMA”. Files with anyother extensions or with no extensions cannot be played.• Recordings you have made should only be used for your personalenjoyment, and as per copyright laws may not be used in otherways without permission of the copyright holder.PlaybackPress or .The amount of change is displayed.b The playing speed can be changed within the range of –12.0% to+12.0%.Changing the playing speed playback>The playing speed can be speeded up or slowed down.n Canceling pitch controlPress and simultaneously, or Press OPEN/CLOSE(5) to open the disc tray..Pitch control playback is not possible in the pure direct mode.No data is output from the optical digital output terminal duringpitch control playback. To output data, return to the normal playingspeed.The time is not displayed accurately during pitch control playback.When the speed is changed, the pitch also changes.The pitch control function cannot be used with MP3, WMA and iPodfiles.••••• PreviousNext |