| 
7ENGLISHENGLISHOperationOpening and closing the drawer and loading adisc32[NUMBER](0~9, +10)[DISC SELECT][9]1[8]5DISC SKIP 5DISC SKIP12<7/9><8/6>3About the button names in this explanation< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only :Buttons on the main unit and remote control unitOperationPress 5.• Make sure the drawer is completely open.Hold the disc by the edges and place it on the disc tray. (Do nottouch the signal surface, i.e., the glossy side.)1Set the disc properly in the tray according to its size.• Set 8 cm discs in the center hole.• Set 12 cm discs in the outer hole.2Press DISC SKIP.The carousel turns and a disc can be loaded in the another disctray.When the drawer is opened during the play mode, it is possibleto load and unload discs in all of the disc trays other than the onewhose disc is currently playing.3Press 5 again.4NOTE:• The player will not operate properly and the disc may even bedamaged if it is not set correctly.• If your finger should get caught in the drawer when it closes,press 5.• Do not place any foreign objects on the disc tray, and do notplace more than one disc on the tray at a time. Otherwisemalfunction may occur.• Do not push in the disc tray manually when the power is off asthis may cause malfunction and damage the CD player.• Do not touch the carousel while it is turning. Also, do not turn thecarousel by hand when it is stopped. Doing so could damage it.• Do not insert disc where indicated by arrow.This could damage the internal mechanism in the unit.LABEL SIDEUP WARDTurning the power onPress .• When a disc is loaded, playback starts automatically.• If no disc is loaded “0 000 00:00” is displayed.¢ To turn off the power:Press again.NOTE:• To turn off the power while a disc is playing, be sure to press 2to stop playback before turning off the power. |
