Denon DHT-391XP Owner's Manual

Also see for AVR-391: Service manual Product sheet Owner's manual Owner's manual Owner's manual

Denon DHT-391XP Owner's Manual Manual pdf 35 page image

32ENGLISHSetting items Setting detailsDefaultThe “Input Assign” settingsare returned to the defaultsettings.Yes : Reset to the defaults.No : Do not reset to the defaults.If you select “Default” and press ENTER, the message “Default?” isdisplayed. Select “Yes” or “No”, and then press ENTER.Auto PresetUse the auto preset function to program radio stations.Setting items Setting detailsStartStart the auto presetprocess.TUNERPress ENTER to start “Auto Preset”.• Press RETURN or MENU to return to the setting menu without “AutoPreset”.• If an FM station cannot be preset automatically, select the desiredstation by tuning it in manually, then preset it manually.Preset Skip Default settings are underlined.Set the preset memory block (from A to G) you do not want to display.Setting items Setting detailsBlock A – Block GSelect a block to be skippedfrom among preset blocks(from A to G).TUNERON : Display the selected preset memory block.Skip : Do not display the selected preset memory block.Video Select Default settings are underlined.Set the source video.Setting items Setting detailsVideo SelectVideo of another inputsource is played backcombined with the playingaudio.Source : Play the picture and sound of the input source.DVD / SAT/CBL / V.AUX / DOCK : Select video input source to view. Thiscan be set for individual input sources.NOTEIt is not possible to select HDMI input signals.Input SetupInput Mode Default settings are underlined.The input modes available for selection may vary depending on the input source.Setting items Setting detailsInputSet the audio input modesfor the different inputsources.Auto : Automatically detect input signal and perform playback.HDMI : Play only signals from HDMI input.Digital : Play only signals from digital input (OPTICAL/COAXIAL).Analog : Play only signals from analog input.• If an input source is “BD”, “GAME” or “DOCK”, “Digital” can beselected by assigning “Input Assign” (vpage 31) to “Opt” or “Coax.”(Selectable items differ depending on the input source.)If an input source is “TU”, the setting is fixed to “Digital”.• If the input source is set to “BD”, “TV” or “Game”, it cannot be set to“Analog”.• When digital signals are properly input, the indicator lights onthe display. If the indicator does not light, check the digital inputconnector assignment and the connections.• Buttons on the remote control unit can be usedfor operations.Each time INPUT MODE is pressed, the setting ischanged as shown below.Auto HDMI Digital AnalogDecodeSet the decode mode forinput source.BD DVD TVSAT/CBL DOCKGAME V.AUXAuto : Detect type of digital input signal and decode and play automatically.PCM : Decode and play only PCM input signals.DTS : Decode and play only DTS input signals.• This item can be set for input sources for which “OPT” or “COAX” isassigned at “Input Assign” (vpage 31).• This item can be set for HDMI input sources (BD, DVD, SAT/CBL orGAME).• Normally set this mode to “Auto”. Set “PCM” and “DTS” wheninputting the corresponding input signal.Remote control operationbuttonsMove the cursor(Up/Down/Left/Right) Confirm the setting Return to previous menu