Denon DHT-T110 Owner's Manual

Also see for DHT-T110: Manual Manual

Contents

Denon DHT-T110 Owner's Manual Manual pdf 4 page image

8ENGLISHSpecificationsFrequency range: 40 Hz to 20 kHzHigh Frequency Drivers: 1/2” (14 mm) tweeter x 2Low Frequency Drivers: 2 x 5” (51 x 127 mm) woofer x 2Dimensions: (H x W x D) 2 7/8 x 23 7/8 x 14” (71 x 608 x 355 mm)rating Voltage AC 120 V, 60 HzWeight: 9.5 lbs (4.3 kg)power consumption: 30 Wpower consumption in standby mode: 0.5 WSpecifications are subject to change without notice.CaUTION: Allowing the base of your TV to hang over any edge of this speaker system increases the risk of the TV tipping, which may result in injury.CaUTION: If your TV comes with an anti-tip device, install it according to the manufacturer’s instructions and adjust the tether as instructedafter placing the TV on top of the system. Installing an anti-tip device is recommended when using a TV with this product. If your TV did notcome with an anti-tip device, you can get one from most retail TV suppliers.• If the TV base is too large to fit on top of the system- place the sound system in another location such as on an open shelf under the TV, but keepit close to your TV so the audio cable will reach. You also could mount your TV on the wall above the system.• Never place the equipment in an unstable location- The equipment may fall, causing serious personal injury or death. Many injuries,particularly to children, can be avoided by taking simple precautions.CaUTION: DO NOT place a CRT type TV on this system. It is not designed for use with this type of TV.IntroductionThank you for choosing Denon. Modern flat-panel televisions are wonders of digital video, but leave little room for serioussound reproduction. The Denon-engineered DHT-T110’s accurate, dynamically wide-range sound bridges the gap, withspacious audio reproduction from Music and Movie modes, including Dolby Digital surround decoding, that bring televisionand movie sound to life. DHT-T110’s inputs adapt to any television or system arrangement, with wireless Bluetooth® stream-ing for convenient audio playback from mobile devices. What’s more, an ingenious remote control learning solution lets youcontinue using your familiar television or cable/satellite remote.We’ve worked hard to make DHT-T110 the best performing product of its kind—and just as diligently to ensure it is thesimplest to set up and easiest to use.You’re about to hear just how much you’ve been missing, but first, please take a few moments to leaf through this brief manual. Youprobably think it is not really necessary, and you may well be correct, but doing so will help you get the best from the DHT-T110.Please save your original shipping carton and packing materials if at all possible. Should you ever need to move or transportDHT-T110, this is by far the safest way to do so.Locating DHT-T110DHT-T110 is designed to support most large flat-panel televisions up to 50" (with a foot base diameter up to 21 1/2 x 12 1/8” (546x 308 mm)) and 60 lbs (27 kg). The television’s base needs to fit entirely within the flat top area of the DHT-T110. There is a "+"mark on the top center of the cabinet. Use that to get the television base centered on DHT-T110.You may also place DHT-T110 on a shelf, or furniture, above or below the screen. However, it should be centered left/right withthe screen, and ideally no more than a few inches above or below. DHT-T110 is not suitable for direct on-wall mounting. DHT-T110 will often sound its best when the DHT-T110’s front grille is close to or flush with the front edge of the furniture or shelf onwhich it rests (this eliminates unwanted sound reflections).Not Centered Centered Base is too large