Denon DN-410X User Manual

Also see for DN-410X: User guide

Contents

3User Guide (English)IntroductionDN-410X is a rackmount audio mixer with 10 channels and Bluetooth ® connectivity. Designedfor professional A/V applications, conference rooms, nightclubs, and restaurants, this mixerfeatures balanced XLR inputs, balanced 1/4” (6.35mm) TRS inputs, and simple single-buttonBluetooth pairing.Please see this guide’s Setup chapter to learn how to integrate DN-410X with your audiosystem, and then refer to the Operation chapter to start using DN-410X.Box ContentsDN-410XPower CableUser GuideSafety & Warranty ManualSupportFor the latest information about this product (system requirements, compatibility information,etc.) and product registration, visit denonpro.com.SetupItems not listed under Introduction > Box Contents are sold separately.1. Use either XLR cables or 1/4” (6.35mm) cables to connect the DN-410X’s outputs(balanced or unbalanced) to your loudspeakers, mixer, amplifier, or other device thataccepts line-level inputs (this device must be powered off).Important: For stereo operation, make sure all left (L) and right (R) outputs are connectedto left and right inputs, respectively.2. Use either XLR cables or 1/4” (6.35mm) cables to connect the DN-410X’s inputs (mic orline) to your microphones or other audio input sources.3. Use the included power cable to connect DN-410X’s power input to your power source.Important: Do not use DN-410X near a microwave oven, which can interfere with thereception.4. Power on your audio input sources first, power on DN-410X, and then power on yourloudspeakers last.See the Connection Diagram on the next page.