Denon DN-501C Owner's Manual

Also see for DN-501C: Owner's manual Quick start guide Owner's manual Instructions Quick start guide

Denon DN-501C Owner's Manual Manual pdf 23 page image

17Getting started Part namesand functions Connections Control functionSetting Defaults File and foldersettings Playback Information17Setting DefaultsSetting Defaultsn System SettingItem Setting Details (Items in bold are factory default)Mono Off: Channel output based on the audio source.On: Summed monaural output.Output RateSets the samplingfrequency for digitaloutput.Auto: Audio output based on the rate of the input media or file.44.1 k: Audio output at 44.1 kHz.48 k: Audio output at 48 kHz.Auto SleepSets the time thatrotation of the discstop.Off: Does not function.30 sec: Switches to sleep mode if there are no operations for 30 seconds.10 min: Switches to sleep mode if there are no operations for 10 minutes.20 min: Switches to sleep mode if there are no operations for 20 minutes.30 min: Switches to sleep mode if there are no operations for 30 minutes.Volume Output Fixed (0dB): Prohibits the output level from being adjusted and fixes it as 0dB.Variable: Output level can be adjusted.For details on the operations, see the separate “Changing the output level”(vpage 26).Ref (XLR/RCA)Output level of theanalog output can bechanged.+24 dBu/+10 dBV: XLR=+24 dBu / RCA=+10 dBV+20 dBu/+6 dBV: XLR=+20 dBu / RCA=+6 dBV+18 dBu/+4 dBV: XLR=+18 dBu / RCA=+4 dBV+6 dBV/+6 dBV: XLR=+6 dBV / RCA=+6 dBVTrim L +2.0 dB - 0 - –2.0 dB:Adjusts the left channel in 0.1 dB steps. Initial value is “0 dB”.Trim R +2.0 dB - 0 - –2.0 dB:Adjusts the right channel in 0.1 dB steps. Initial value is “0 dB”.Display Contrast 1 - 5: 1 is the darkest, 5 is the brightest. Initial value is “5”.IR Remote On: Receives IR remote commands.Off: Does not receive IR remote commands.Serial Bit RateSets the RS-232C bitrate.9600: 9600 bps38400: 38400 bpsSerial Protocol MIDI: Conforms to MIDI controls.RC: Conforms to D&M RC protocol.Password ****: Sets a password (6 to 12 characters) for system settings. Displayed as“****” when set.Default value is “No password (NULL)”.Default Resets all of the system settings to the defaults.