Denon DN-508MX User Manual

Contents

12InputClick the Input button at the top to view the Input page where you can set the equalization or outputlevel of each input (the mic/line inputs, ST inputs, or Aux In).Signal: This light indicates that the input is receiving an audio signal.Peak: This light indicates that the input is receiving an audio signal that is “peaking” (exceeding 0dB). If this happens, reduce the setting of the Mic/Line Gain knob on the rear panel (for Mic 1–6) oron the audio source itself (for Source 1–4 and Aux).EQ: Click this button to open the Input EQ window. In this window, click each menu to set thefrequency (Freq), Gain, or bandwidth (Q) of the 3 available equalizations: a low-shelving filter (SHL),a high-shelving filter (SHH), and a parametric equalizer (PEQ). Only the parametric equalizer has abandwidth control.Output: Click this button to open the Mic Output window. In this window, click and drag each faderto set the audio signal level that each mic/line channel sends specifically to each zone.SettingsClick the Settings button at the top and select Schedule, I/O Name, or System to view thecorresponding settings page.Important: Click the lock icon at the top of the page to lock or unlock the settings. When locked, youcannot edit any of the settings. This is helpful to prevent any accidental changes to the overall operation.ScheduleSchedule: Click this menu to select a schedule toview.• On/Off: Click one of these buttons to enable ordisable the schedule. You can use multipleschedules simultaneously.• Date: Click this menu to set a specific date onwhich to apply the schedule (instead of regulardays of the week). Click each menu to select theMonth, Day, and Year. The ** option sets theschedule to repeat every month, day, or year.• Day of Week: Click this menu to apply theschedule regularly to certain days of the week(instead of a specific date). Click each checkboxto select or deselect the day.• Time: Click each menu (Hour and Minute) to setwhen the schedule will be applied. The ** optionsets the schedule to repeat every hour.• Restore: Click this menu to reset all changesyou have made to the current schedule.• Save: Click this menu to save the currently shown schedule.