Denon DN-X1500 Operating Instructions Manual

Also see for DN-X1500: Operating instructions Operating instructions Brochure & specs Service manual

Contents

Denon DN-X1500 Operating Instructions Manual Manual pdf 10 page image

10ENGLISH6 FADER STARTIf the separately sold DN-S5000, DN-S3000, DN-D9000, DN-D4000 and etc. players are connected to LINE2, 4,6 or 8, they can be started using the source input fader (Ch. Fader) or Crossfader, as long as the 3.5 mm stereomini cords have been connected.LINE 2 LINE 4 LINE 6 LINE 8FADERLINE 2FADERLINE 4FADERLINE 6FADERLINE 8DN-X1500MAIN ALPHAFADERMAINFADERALPHADN-S5000CD1MAIN ALPHAFADERMAINFADERALPHADN-S5000CD23.5 mm stereo mini cordRCA cordChannel Fader StartTurn the INPUT ASSIGNswitch #4 to select thedesired source from LINE2,4, 6 or 8.12Crossfader StartNOTE:• Channel Fader Start and Crossfader Start for thesame source will not operate simultaneously.You must select from either one. If both CHFADER START and CROSSFADER START A, Bswitches are ON, priority will be the cross fader.Turn on the CH FADER STARTswitch @6.3Move the source input fader(Ch. Fader) !9 of CH-1, CH-2,CH-3 or CH-4 control all theway to the bottom.4 Set the standby mode on CD player.5When you want to start theplayer, move up the sourceinput fader (Ch. Fader) !9 andthe CD player will beginplaying.Turn the INPUT ASSIGNswitch #4 to select thedesired source from LINE2,4, 6 or 8.12Using the CROSSFADERASSIGN switch !0, assign thechannel or Sampler source into Aor B of Crossfader.3Turn on the CROSSFADER START A, Bswitches !7.5 Set the standby mode on CD player.6 Use the CROSSFADER CONTOUR control @0to control the cross fader startup curve.4Slide the Crossfader !8 all the way in directionopposite the source you want to start. (In thefollowing example, startup is done with the CDplayer connected set to Assign A.)7When the Crossfader !8 is slid in the oppositedirection, CD player play will begin.