Denon DNP-730AE Owner's Manual

Also see for DNP-730AE: Quick start guide Owner's manual Service manual

Contents

Wireless LANWhen connecting to a wireless LAN network, stand the rod antenna forwireless LAN connection upright on the rear panel.See “Settings” (v p. 69) on how to connect to a wireless LAN router. .InternetModemTo WAN sideRouter with access point0 With this unit, it is possible to use the DHCP and Auto IP functions to make thenetwork settings automatically.0 When using this unit with the broadband router’s DHCP function enabled, this unitautomatically performs the IP address setting and other settings. When using thisunit connected to a network with no DHCP function, make the settings for the IPaddress, etc., at “Network”. (v p. 68)0 When using this unit, we recommend you use a router equipped with the followingfunctions:0 Built-in DHCP serverThis function automatically assigns IP addresses on the LAN.0 Built-in 100BASE-TX switchWhen connecting multiple devices, we recommend a switching hub with aspeed of 100 Mbps or greater.0 Use only a shielded STP or ScTP LAN cable which is easily available atelectronics stores. (CAT-5 or greater recommended)0 The normal shielded-type LAN cable is recommended. If a flat-type cable orunshielded-type cable is used, other devices could be affected by noise.0 When using a WPS (Wi-Fi Protected Setup) compatible router, you can connecteasily to Wi-Fi by pressing the Wi-Fi CONNECT/WPS button on this unit. (See theseparate “Quick Start Guide”.)Contents Connections Playback Settings Tips Appendix22Front panel Rear panel Remote control unit Index