2DRA-395SPECIFICATIONS Audio Section(Power Amplifier)Rated output: 80W + 80W (8Ω/ohms, 20Hz ~ 20kHz with 0.08% T.H.D.)Output terminals: A or B 4 to 16Ω/ohmsA + B 8 to 16Ω/ohms(Analog)LINE input - PRE OUTInput sensitivity/input impedance: 200mV/47kΩ/kohmsFrequency response: 10Hz ~ 50kHz: ±1.5dBS/N ratio: 100 dB (IHF-A weighted)Total harmonic distortion: 0.009% (−3dB at rated output, 8Ω/ohms) (1kHz)Rated output: 1.2VPHONO input - REC OUTInput sensitivity/input impedance: 2.5mV/47kΩ/kohmsRIAA deviation: ±0.5dB (20Hz ~ 20kHz)S/N ratio: 74dB (IHF-A weighted, with 5mV input)Total harmonic distortion: 0.03% (1kHz, 3V)Rated output/Maximum output: 150mV/7V Video Section(Standard Video Jacks)Input/output level and impedance: 1V p-p, 75Ω/ohmsFrequency response: 5Hz ~ 10MHz +1, −3dB Tuner Section[FM] (note: μV at 75Ω/ohms, 0dBf = 1×10 -15W) [AM]Receiving range: 87.50MHz ~ 107.90 MHz 520kHz ~ 1710kHzUsable sensitivity: 1.4μV (14.2dBf) 18μV50dB quieting sensitivity: MONO 2.8μV (20.2dBf)STEREO 23μV (38.5dBf)S/N ratio: MONO 80dB (IHF-A weighted)STEREO 75dB (IHF-A weighted)Total harmonic distortion: MONO 0.15% (1kHz)STEREO 0.3% (1kHz) GeneralPower supply: AC120V, 60HzPower consumption: 3.39AMaximum external dimensions: 434 (W) × 147 (H) × 417 (D) mm (17-1/16″ × 5-25/32″ × 16-7/16″)Weight: 9.7kg (21lbs 6oz) Remote Control Unit (RC-894)Batteries: R03/AAA Type (two batteries)External dimensions: 64 (W) × 206 (H) × 19 (D) mm (2-13/64″ × 8-9/32″ × 3/4″)Weight: 140g (Approx. 4.9 oz) (including batteries)* For purposes of improvement, specifications and design are subject to change without notice.SAFETY PRECAUTIONSThe following check should be performed for the continued protection of the customer and service technician.LEAKAGE CURRENT CHECKBefore returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassisresistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of thepower cord is less than 460 kohms, the unit is defective.