ENGLISHENGLISH19System Operations System OperationsUse [8] or [9] to select “1_on / E_off”, thenpress MENU/SET.• The timer standby indicator “ ” lights.The time is now set.For details, see “Operation of the everyday and once timers”( page 16).6Press or [POWER OFF].• The power is set to the standby mode and the DRA-F102’spower indicator lights orange.When the timer start time is reached, playback starts from thefirst track on the CD.7NOTE:• If the current time is not set, the timer standby indicator “ ”will not light.• When the timer is set, the timer standby indicator “ ” lights.• Be sure to set the power to the standby mode when you wantthe timer to operate.Example: Recording a radio program onto a cassette tapeLoad the cassette tape onto which you want to record beforehand.Be sure to load the cassette tape with the side onto which youwant to record at the top.Use to switch the desired reversemode.Use as desired to select the Dolby NoiseReduction system.12Press MENU/SET once.• “TIMER” flashes.56Use to select the direction ofplayback/recording.3Adjust the recording level and set the recordingmode.For details, refer to the cassette deck’s operating instructions.47Use [8] or [9] to select “EVERYDAY” or“ONCE”, then press MENU/SET.Use [8] or [9] to select “TUNER // TAPE”,then press MENU/SET.Conducting timer recordingCD synchronized recording/Synchronized recording functionThis function lets you easily record the tracks from a CD onto acassette tape.For instructions on operations, refer to the operating instructionsincluded with the cassette deck.NOTE:• No signals can be recorded on the leader tape at the beginningof the cassette tape. To avoid missing the beginning, werecommend setting the timer to start recording about 1 minutebefore the program is scheduled to start.• To conduct normal recording, turn off the timer standby indicator“ ”.8 Perform steps 4 ~ 8 under “Setting the everyday oronce timer” ( page 15, 16).When the timer start time is reached, recording starts.Perform steps 3 ~ 5 under “Setting the current time”( page 15) to set the timer start time.4Perform steps 3 ~ 5 under “Setting the current time”( page 15) to set the timer stop time.53 Use [8] or [9] to select “CD”, then pressMENU/SET.
