ENGLISHGetting StartedPlaybackSetting the TimerOther FunctionsTroubleshootingSpecificationsSystem FunctionsButton located on both the main unit and the remote controlunitBUTTONButton only on the main unitButton only on the remote control unit[BUTTON]Symbols used to indicate buttons in this manualGExampleHSetting the current time to 10:15 am1PressON/STANDBYto turn the power on.2Press[MENU].Various types of setting menus are displayed.3Use[u]or[i]to select “CLOCK SETUP”, thenpress[ENTER/MEMO]or[p].4Use[u]or[i]to set the “hours”.5Press[ENTER/MEMO]or[p].The “minutes” display flashes.6Use[u]or[i]to set the “minutes”.7Press[ENTER/MEMO]or[p].The current time is set, and the normal display reappears.M E N UC L O C KS E T U PM E N UC L O C KS E T U PC L O C KS E T U P1 0 : 0 0C L O C KS E T U P1 0 : 0 0C L O C KS E T U P1 0 : 1 5C L O C KS E T U P1 0 : 1 5nChecking the current time when the power is onPress[CLOCK].Press once more and the display returns to its original condition.nChecking the current time when the power is setto standbyPress[CLOCK].The current time is displayed for 10 seconds.NOTEThe time cannot be set when in the standby mode. Turn on the powerfirst.ON/STANDBYON/STANDBY[MENU][CLOCK][ENTER/MEMO][uip]SetupSetting the Current Time(24-Hour Display)NOTE•Insert the AC plugs securely. Incomplete connections could causenoise.Do not unplug the power cord before the power indicator turns offand the DRA-F107 enters Standby mode.•Only use the supplied power cord.•Be sure the power cord is unplugged from the power outlet beforeconnecting or disconnecting it to the AC IN.•The AC outlet is for use with audio components. Do not use it toconnect hair dryers or any equipment other than audio components.Turning the Power On(vpage 12)Once Connections areCompletedConnecting the Power CordConnectionsSetup