17Listening to internet radioInternet radio refers to radio broadcasts distributed over the Internet.Internet radio stations from around the world can be received.NOTEBefore playing back the Internet radio, this unit must be connectedto the network. For how to connect this unit to the network, see“Network connections and settings” (vpage 8).Important informationThe broad cast station types and specifications supported by this unitfor playback are as follows.GPlayable broadcast station typesHSupported file types Internet radioWMA (Windows Media Audio) PMP3 (MPEG-1 Audio Layer-3) PGPlayable broadcast station specificationsHSamplingfrequency Bit rate ExtensionWMA (WindowsMedia Audio) 32/44.1/48 kHz 48 – 192 kbps .wmaMP3 (MPEG-1Audio Layer-3) 32/44.1/48 kHz 32 – 320 kbps .mp3Listening to preset Internet radio stations1 Prepare for playback.q Check the network environment, then turn on this unit’spower (vpage 8 “Network connections and settings”).w If settings are required, make the “Network connections andsettings” (vpage 8).e If settings are required, make the “Setting the current time(Auto Adjust) (24-Hour Display)” (vpage 13).2 Press to switch the inputsource to “Preset 1”, “Preset 2”or “Preset 3”.Playback starts.• Use Cocoon App to change preset details.• There are many Internet radio stations on the Internet, and thequality of the programs they broadcast as well as the bit rate of thetracks varies widely.Generally, the higher the bit rate, the higher the sound quality, butdepending on the communication lines and server traffic, the musicor audio signals being streamed may be interrupted. Inversely, lowerbit rates mean a lower sound quality but less tendency for the soundto be interrupted.• “Server Full” or “Connection Down”is displayed if the station isbusy or not broadcasting.• The Internet radio station name appears on the display of this unit.NOTEThe radio station database service may be suspended without notice.n Internet radio operation buttonsOperation buttons Function+, – Volume up / down13 Mute On/OffSwitching the input sourceX Power on/standby