Denon DVD-1710 Operating Instructions Manual

Also see for DHT-485DV: Operating instructions Datasheet Quick connect guide

Contents

– 12 – EN1. DIGITAL OUT JACKSUse either an optical or coaxial digital cable to connect to an AV amplifier with a built-in decoder (AV control center).2. 2ch AUDIO OUT JACKSConnect to the Audio input jacks of A/V-compatible TV or wide screen TV, Stereo system.3. VIDEO OUT JACKUse a video cable to connect one of the jacks to Video input on your A/V-compatible TV, wide screen TV, or Stereo system.4. COMPONENT VIDEO OUT JACKSUse these jacks if you have a TV with Component Video in jacks. These jacks provide CR/P R, CB/P B and Y video. Alongwith S-Video, Component Video provides the best picture quality.5. S-VIDEO OUT JACKUse the S-Video cable to connect this jack to the S-Video jack on your A/V-compatible TV or wide screen TV for a higherquality picture.Selecting Progressive Scan (525p/480p or Interlaced 525i/480i) Playback¡If your TV is compatible with progressive scanning (525p/480p), connect the TV to the Component Video jacks of the DVDplayer and set “PROGRESSIVE” to “ON” in the display setting. Next, set your TV to the progressive scan mode.Refer to page 23 for instructions on changing the display setting.¡If your TV is not compatible with progressive scanning, set “PROGRESSIVE” to “OFF”.¡Use a commercially available adaptor if the video input jacks of your TV or monitor is the BNC type.What is Progressive Scanning?¡Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolutionthan that of traditional (525i/480i) television signals.CONNECTIONSDescription - rear panel“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems,Inc.Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarksof Dolby Laboratories.1 2 3 4 5