Denon DVD-1800BD Operating Instructions Manual

Also see for DVD1800BD - Blu-Ray Disc Player: Specifications Owner's manual Operating instructions Service manual

Denon DVD-1800BD Operating Instructions Manual Manual pdf 18 page image

14PlaybackENGLISHENGLISHPlayback HDMI CECHDMI CEC allows integrated system control over HDMI and is partof the HDMI standard.In addition to DENON AV components, it allows interoperabilitywith CEC- compatible AV components and TVs made by othermanufacturers. This function may not work properly dependingon a device to be connected.To set “HDMI CEC”, press [SETUP], then select “Custom” A“Others” A “HDMI CEC”.When “HDMI CEC” setting is set to “On”, functions listed below willbe available.One Touch PlayWhen this unit is turned on, the connected devices are also turnedon and the appropriate external input source will be selectedautomatically. The appropriate external input source can also beselected automatically, when you press B when the unit’s poweris on.StandbyWhen the connected HDMI CEC compatible display device isturned off, this unit may also turn off together.A[U / V / Y / Z]C[POWER ON]B[ENTER]A B C[POWER OFF]About the button names in this explanation< >: Buttons on the main unit[ ] : Buttons on the remote controlButton name only:Buttons on the main unit and remote controlDirect Playback1 Press or [POWER ON].This indicator lights up in red in standby mode andturns off when the power is on.2 Turn on the display device and select theappropriate input on the device to which the unitis connected. (HDMI CEC)3 Press A to open the disc tray.4 Place the disc on the disc tray with its label sidefacing up.5 Press A to close the disc tray.Some discs may start playback automatically.6 Press B to start playback.For many of BD-video and DVD-video, a menu screenmay appear.In this case, use [U / V / Y / Z] to select the desireditem, then press [ENTER].7 Press C once to stop playback temporarily.Refer to “Resume Playback” on page 16.To eject the disc:Press A to open the disc tray, then remove the discbefore turning off the unit.DVD-V DVD-VR CDBD-VAlign the disc to thedisc tray guide.It may take a while to load the disc.Note• Power continues to be supplied to some of the circuitry evenwhen the power is in the standby mode. When leaving homefor long periods of time or when traveling, unplug the ACcord from the AC outlet.• may appear at the top-right on the screen when theoperation is prohibited by the disc or this unit.• During the playback of 2-layered disc, pictures may stop for amoment. This happens when the 1st layer switches to the2nd layer. This is not a malfunction.• The operation may vary when you play back BD/DVD withdisc menu. Refer to the manual accompanying the disc fordetails.• HDMI CEC is available only when the display device isconnected by an HDMI cable, and when it supports HDMI CECfeature.