Denon DVD-3930 Service Manual

Also see for DVD-3930: Specification Operating instructions Service manual

Contents

18DVD-3930/3930CISERVICE MODE1. Aging Mode(1) preparation(a) Equipment used: Any one of DVD Karaoke Disc (containing more than 10 titles).(b) Unit setting : No spec other than the following procedure (Aging mode).At the tray open status, press the “POWER” button to turn on the power while pressing the “PLAY” and “OPEN/CLOSE” buttonsfor DVD operation simultaneously. mark on the FL lights, and the unit is set to the heat run mode.(2) procedure(a) According the above, set to the aging mode.(b) Set a DVD Karaoke disc to the tray and press the “PLAY” button once. mark on the FL blinks, and aging operation (afterplayback title-1 and title-10 of the disc, the tray open/close is made automatically, then playback the title-1 again) starts.This aging operation continues automatically until it is stopped or it stops caused by an error. In case of some error in DVD, thefollowing error messages are displayed on the FL.2. Initial Setting Mode(1) Preparation(a) Equipment used: None(b) Unit setting: No spec other than the following procedure.(2) Procedure(a) Initialize the DVD player when μcom, peripheral parts of μcom, or Main P.W.B. has been replaced in servicing.(b) Carry out the following to restore factory setting mode.At the player stop condition, press 2 buttons for DVD operation (“PLAY” and “ SKIP FWD”) until “INITIALIZE” appearsand disappears in the FL.(“Initialized” appears and disappears on the TV screen.)(c) All user setting will be lost and its factory setting will be restored when this initialization is made. Be sure to memorize your settingfor restoring again after the initialization.3. μcom Firm Check Mode(1) Preparation(a) Equipment used: None(b) Unit setting: No spec other than the following procedure.(2) Procedure(a) Press the “POWER” button to turn on the power while pressing the “PLAY” and “OPEN/CLOSE” buttons for DVD operation si-multaneously.(b) DVD μcom and other μcom firm check mode.This mode is for displaying the status of each μcom employed.Push remote contraller “3265”.DVD μcom firm: Press the “MENU” button.Each time the “MENU” button on the remote control unit is pressed, μcom firm is displayed one after another.Ex.: [BE 8284, MAKE DAY 522, DSP 8250, IP 060621]No. Error contents FL display1 Tray Error ERROR 012 Bad Disc ERROR 023 Search Error ERROR 034 Read Error ERROR 04w w w . x i a o y u 1 6 3 . c o mQ Q 3 7 6 3 1 5 1 5 0 992894298T E L 1 3 9 4 2 2 9 6 5 1 3 992894298051513673QQTEL 13942296513 QQ 376315150 892498299TEL 13942296513 QQ 376315150 892498299http://www.xiaoyu163.comhttp://www.xiaoyu163.com