Denon DVD-556 Operating Instructions Manual

Contents

– 22 – ENYou can change some Audio settings. It only affects duringthe playback of DVD discs.Press the SETUP button in stop mode.Press the Cursor buttons (s or B) to selectCUSTOM, then press the ENTER button.• The custom mode will appear.Press the Cursor buttons (sor B) to select AUDIO, thenthe ENTER button to confirm.Press the Cursor buttons (K orL) button to select an item,then press the ENTER button.• This menu display contains 2 pages. Press the Cursorbutton (L) repeatedly to show the next page.DRC (Dynamic Range Control)(Default : ON)• DRC function compresses therange of sound volume.• DRC function is available only onthe discs that are recorded in theDolby Digital format.LPCM SELECT (Default : OFF)• Set to ON when outputting in48kHz (or 44.1kHz).• This function is available only ondigital outputting of a disc record-ed in over 96kHz (or 88kHz).When playing disc with copyright protection• The sound will be down sampled at 48kHz, even if youset to OFF.DOLBY DIGITAL(Default: BITSTREAM)• Set to BITSTREAM when theplayer is connected to a DolbyDigital decoder.• This function is effective only forthe COAXIAL and OPTICAL con-nections.BITSTREAM:DOLBY DIGITAL signals are output as Bitstream.PCM: Convert Dolby Digital to PCM.DTS(Default: BITSTREAM)• Set to BITSTREAM when the unitis connected to a DTS decoder.BITSTREAM:DTS signals are output asBitstream.OFF: No DTS sound will be output.• DTS sound is output only from digital audio outputs.Press the SETUP button to exit and activate thenew settings.5QUICKQUICK4321Audio SettingAUDIODRC ONLPCM SELECT OFFDOLBY DIGITAL BITSTREAMDTS BITSTREAMAUDIODRC ONLPCM SELECT OFFDOLBY DIGITAL BITSTREAMDTS BITSTREAMAUDIODRC ONLPCM SELECT OFFDOLBY DIGITAL BITSTREAMDTS BITSTREAMAUDIODRC ONLPCM SELECT OFFDOLBY DIGITAL BITSTREAMDTS BITSTREAMAUDIODRC ONLPCM SELECT OFFDOLBY DIGITAL BITSTREAMDTS BITSTREAMDisplay SettingYou can change certain aspects of the DVD display screens,still mode setting, the display panel on the front of the DVDplayer and Progressive settings.Press the SETUP button in stop mode.Press the Cursor buttons (s or B) to selectCUSTOM, then press theENTER button.• The custom mode will appear.Press the Cursor buttons (s orB) to select DISPLAY, then pressthe ENTER button to confirm.Press the Cursor buttons (K orL) to select an item, then press the ENTER button.TV ASPECT (Default : 4:3 LETTER BOX)• Press the Cursor buttons (K orL) for an item selection, thenpress the ENTER button.• Select 4:3 LETTER BOX for ablack bars appears on top andbottom of the screen.• Select 4:3 PAN & SCAN for a fullheight picture with both sidestrimmed.• Select 16:9 WIDE if a wide-screen TV is connected to theDVD player.STILL MODE (Default : AUTO)• Press the Cursor buttons (K orL) for an item selection (AUTO,FIELD, or FRAME), then pressthe ENTER button.• This function allows you toadjust picture resolution andquality in still mode.• An individual picture on TV screen is called as “frame”,which consists of two separate images called as “field”.Some pictures may be blurred at the AUTO setting instill mode due to their data characteristics.• AUTO: Automatically selects the best resolution setting(FRAME or FIELD) based on the data characteristics ofthe pictures.• FIELD: Select FIELD when the pictures are still unsta-ble even if AUTO is selected. FIELD stabilizes the pic-tures, although the picture quality may become coarsedue to the limited amount of data.• FRAME: Select FRAME to display relatively motionlesspictures in higher resolution. FRAME improves the pic-ture quality, although it may unstabilize the pictures dueto simultaneous output of two field data.PROGRESSIVE (Default: OFF)• Press the Cursor buttons (K or L)for set PROGRESSIVE to ON orOFF, then press the ENTER button.• The setting will be effectivewhen you exit the setup screenby pressing SETUP.• When PROGRESSIVE is ON,P.SCAN appears on the DVDplayer’s display after you exit the setup screen.• Refer to page 11 for more details.PROG.MODE (Default: AUTO1)• Press the Cursor buttons (K orL) to select a setting (AUTO1,AUTO2, or VIDEO), then pressthe ENTER button.• This function allows you toselect the image output,depending on the base material(video or film) of the recorded DVD images, whenVIDEO OUT is set to COMPONENT PROGRESSIVE.• AUTO1: Automatically selects the best image output(AUTO2 or VIDEO) based on the information ofdata stream.• AUTO2: A combination of the top and bottom fields isoutput as one-frame image.QUICKQUICK4321DISPLAYTV ASPECT 4:3 LETTER BOXSTILL MODE AUTOPROGRESSIVE OFFPROG.MODE AUTO1DISPLAYTV ASPECT4:3 LETTER BOX4:3 PAN & SCAN16:9 WIDEDISPLAYTV ASPECT 4:3 LETTER BOXSTILL MODE AUTOPROGRESSIVE OFFPROG.MODE AUTO1DISPLAYAUTOFIELDFRAMESTILL MODEDISPLAYAUTO1AUTO2VIDEOPROG. MODEDVD SETUP• VIDEO: Either of top or bottom field is output for one-frame image.Press the SETUP button to exit and activate the newsettings.5