Denon DVD-5910 Operating Instructions Manual
Also see for DVD-5910: Supplementary guideSpecificationSpecificationsService manualOperating instructions
                                                                                                                                                                                                                                                      | |
Contents
|
56ENGLISHPLAY STOPOPEN/CLOSEDVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-5910STILL / PAUSEPURE DIRECT SELECTVIDEO MODEPUSH ENTER FORMAT SELECTHDMI / DVI SUPER AUDIO CD SET UPON / STANDBY3,41 212 USING THE VIDEO SETUP2 The video output setting of the HDMI and the DVI-D connectors can be changed.2 The video output setting of the PICTURE MODE, TV SYSTEM, SQUEEZE MODE and AUDIO ADJUST also can be changed.1Press the HDMI/DVI SELECT button.• The modes described below will appear on the display.HDMI/DVI OFF (Factory default)Not output via the HDMI and DVI-D connectors. Set to“OFF” when not connecting to these connectors.HDMI Y Cb CrThe Y Cb Cr format video signals and audio signals areoutput via the HDMI connector.The RGB format video signals are output via the DVI-D connector.HDMI RGBThe RGB format video signals and audio signals areoutput via the HDMI connector.The RGB format video signals are output via the DVI-D connector.✽ When connecting to the DVI device via the HDMIconnector, signals are output in RGB formatregardless of whether “HDMI Y Cb Cr” or “HDMIR G B” is set.Main unitSELECT FORMATHDMI / DVIDisplay the setting mode✽ The HDMI and DVI indicators flash when the connection is beingchecked, then stop flashing, once the check is completed.HDMI/DVI OFFHDMI Y Cb CrHDMI R G B2 Main unitSELECT FORMATHDMI / DVI480P/576P720P1080iSELECT FORMAT NTSC/PALAUDIOSUBTITLEANGLEHDMI/DVI OPEN/SUPER AUDIOCLOSECD SETUPPROGRAM/DIRECTCLEARCALLSEARCH MODEDISPLAYTOP MENURETURNMENUPLAYSTILL/PAUSESTOPBACK LIGHTPOWER OFF POWER ON12Remote control unitHDMI/DVISELECT FORMATRemote control unitHDMI/DVISELECT FORMATPress the HDMI/DVI FORMAT button.• The modes described below will appear on the display.Select the item you wish to set and define it.480P/576P (Factory default)Outputs the image via the HDMI or DVI-D connectorat 480P or 576P.720POutputs the image via the HDMI or DVI-D connectorat 720P.1080iOutputs the image via the HDMI or DVI-D connectorat 1080i.AUTOThe performance of the HDMI device connected tothe HDMI/DVI-D connectors is detected automaticallyand the signals are output according to the HDMIdevice’s panel resolution or maximum resolution. Thepanel resolution or maximum resolution is selectedaccording to the setting made at “HDMI AUTOFORMAT” in the initial settings. (By factory defaultthis is set to “PANEL RES.”(see pages 33, 36.)).When a DVI device is connected, the signals areoutput with a resolution of “480P/576P”automatically, so set the resolution manually.AUTOENGLISH |
Related manuals for Denon DVD-5910
Denon DVD-5910 Operating Instructions Manual
Denon DVD-910 Operating Instructions Manual
Denon DVD-910 Operating Instructions Manual
Denon DVD-3910 Operating Instructions Manual
Denon DVD-5900 Operating Instructions Manual
Denon DVD-3910 Operating Instructions Manual
Denon DVD-1910 Operating Instructions Manual
Denon DVD-3910 Operating Instructions Manual
Denon DVD-2910 Operating Instructions Manual
Denon DVD-5900 Operating Instructions Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine