Denon DVM-1815 Operating Instructions Manual

Also see for DVM-1815: Specifications Operating instructions Operating instructions Operating instruction Service manual

Contents

Denon DVM-1815 Operating Instructions Manual Manual pdf 11 page image

English– 11 – ENLoading the BatteriesFUNCTIONAL OVERVIEWDisplayDisplays During OperationStays on when the inserteddisc is being played back.Lights up when a CD isinserted into the tray.Lights up when a DVD is inserted into the tray.Lights up when theinserted disc comesto a pause.Stays on when repeat chapter function is on.Stays on when repeat track function is on.Stays on whenthe A-B repeatfunction is on.Stays on whenthe repeat function is on.Stays on when repeattitle function is on.Displays how long a current title or track has beenplayed back. When a chapter or track has switched,the number of a new title, chapter or track is displayed.1 23 45The playing discnumber flashes on.Power onNo disc insertedTray openTray closedLoading the DiscPower offTray rotationAC cord plugged in1. Open the battery compartment cover.2. Insert two “AA” (R6P) batteries, witheach one oriented correctly.3. Close the cover.NOTES• Do not mix alkaline and manganese batteries.• Do not mix old and new batteries.Cautions On Batteries• Use “AA” (R6P) batteries in this remote control unit.• Replace the batteries with new ones approximatelyonce a year, though this depends on the frequencywith which the remote control unit is used.• If the remote control unit does not operate fromclose to the main unit, replace the batteries withnew ones, even if less then a year has passed.• The included battery is only for verifying operation.Replace it with a new battery as soon as possible.• When inserting the batteries, be careful to do so inthe proper direction, following the and marksin the remote control unit’s battery compartment.• To prevent damage or battery fluid leakage:• Do not use a new battery with an old one.• Do not use two different types of batteries.• Do not short-circuit, disassemble, heat or disposeof batteries in flames.• Remove the batteries when not planning to use theremote control unit for a long period of time.• If the batteries should leak, carefully wipe off thefluid from the inside of the battery compartment,then insert new batteries.